Packages changed:
Mesa
Mesa-drivers
MozillaFirefox (96.0.1 -> 96.0.2)
alsa-ucm-conf
alsa-utils
apparmor
autofs (5.1.7 -> 5.1.8)
autoyast2 (4.4.25 -> 4.4.26)
avahi
bind (9.16.24 -> 9.16.25)
btrfsprogs
calligra
chrony
cifs-utils (6.13 -> 6.14)
codec2 (1.0.1 -> 1.0.3)
cryptsetup (2.4.1 -> 2.4.3)
dhcp
dracut (055+suse.179.g3cf989c2 -> 055+suse.194.gdd41932a)
exim
expat (2.4.2 -> 2.4.3)
fdk-aac-free
ffmpeg-4
fftw3
file-roller (3.40.0 -> 3.40.0+51)
flatpak (1.12.3 -> 1.12.4)
folks (0.15.3 -> 0.15.4)
glusterfs
gnome-photos
gnutls (3.7.2 -> 3.7.3)
gstreamer-editing-services
gstreamer-plugins-bad
gstreamer-plugins-rs
gvfs
inkscape
iso-codes (4.8.0 -> 4.9.0)
kbd
kconfigwidgets
kdump (0.9.2 -> 1.0)
kernel-firmware (20211123 -> 20220119)
kernel-source (5.16.0 -> 5.16.1)
ldb
libapparmor
libblockdev
libchamplain
libcontainers-common
libfido2
libglvnd
libjansson (2.13.1 -> 2.14)
libndp (1.7 -> 1.8)
libnettle
libnma (1.8.32 -> 1.8.34)
libpwquality
librdkafka (1.8.0 -> 1.8.2)
libreoffice
libsmi
libspf2 (1.2.10 -> 1.2.11)
libvirt (7.10.0 -> 8.0.0)
ncurses (6.3.20220101 -> 6.3.20220115)
nvme-cli (1.16 -> 2.0~0)
openSUSE-build-key
perl-JSON (4.04 -> 4.05)
perl-MRO-Compat (0.13 -> 0.15)
perl-Net-SSLeay (1.90 -> 1.92)
pipewire
psmisc (23.3 -> 23.4)
python-async_timeout (4.0.1 -> 4.0.2)
python-google-resumable-media (2.0.0 -> 2.1.0)
python-ipython (7.30.1 -> 8.0.1)
python-libvirt-python (7.10.0 -> 8.0.0)
python-pyftpdlib
python-pyudev (0.22.0 -> 0.22.0+git.1642212208.d5630bf)
python-s3fs (2021.7.0 -> 2021.11.1)
python-tqdm
ristretto (0.12.1 -> 0.12.2)
rpm-config-SUSE (0.g89 -> 0.g93)
samba (4.15.2+git.193.a4d6307f1fd -> 4.15.3+git.219.40cc1cd8591)
selinux-policy
simple-scan
spamassassin
sqlite3 (3.37.1 -> 3.37.2)
sssd
systemd (249.7 -> 249.9)
systemd-rpm-macros (14 -> 15)
u-boot-rpiarm64 (2021.10 -> 2022.01)
virglrenderer
virt-manager
webkit2gtk3 (2.34.3 -> 2.34.4)
webkit2gtk3-soup2 (2.34.3 -> 2.34.4)
wicked
xdg-desktop-portal (1.10.1 -> 1.12.1)
xdg-desktop-portal-gtk (1.10.0 -> 1.12.0)
yast2-bootloader (4.4.11 -> 4.4.13)
yast2-firstboot (4.4.6 -> 4.4.7)
yast2-packager (4.4.19 -> 4.4.20)
yast2-ruby-bindings (4.4.6 -> 4.4.7)
yast2-trans (84.87.20220109.a8187edd75 -> 84.87.20220116.6b981cb0d7)
=== Details ===
==== Mesa ====
Subpackages: Mesa-dri-devel Mesa-libEGL1 Mesa-libGL1 Mesa-libglapi0 libgbm1
- using memory-constraints on ppc64 for trying to avoid OOM during
build (boo#1194739)
==== Mesa-drivers ====
Subpackages: Mesa-dri Mesa-gallium Mesa-libva libvdpau_r300 libvdpau_r600 libvdpau_radeonsi libvulkan_radeon
- using memory-constraints on ppc64 for trying to avoid OOM during
build (boo#1194739)
==== MozillaFirefox ====
Version update (96.0.1 -> 96.0.2)
Subpackages: MozillaFirefox-translations-common
- Mozilla Firefox 96.0.2
* Fix an issue that caused tab height to display inconsistently
on Linux when audio was played (bmo#1714276)
* Fix an issue that caused Lastpass dropdowns to appear blank in
Private Browsing mode (bmo#1748158)
* Fix a crash encountered when resizing a Facebook app
(bmo#1746084)
==== alsa-ucm-conf ====
- Fix regression for AMD ACP LED control:
0002-HDA-acp-avoid-to-create-Mic-ACP-LED-control-for-the-.patch
==== alsa-utils ====
- Fix alsamixer color config regression:
0001-alsamixer-Fix-regression-in-color-setup.patch
==== apparmor ====
Subpackages: apparmor-abstractions apparmor-docs apparmor-parser apparmor-profiles apparmor-utils pam_apparmor python3-apparmor
- add update-samba-abstractions-ldb2.diff: Cater for changes to ldb
packaging to allow parallel installation with libldb;
(bsc#1192684).
==== autofs ====
Version update (5.1.7 -> 5.1.8)
- update to 5.1.8:
* add xdr_exports().
* remove mount.x and rpcgen dependencies.
* dont use realloc in host exports list processing.
* use sprintf() when constructing hosts mapent.
* fix mnts_remove_amdmount() uses wrong list.
* Fix option for master read wait.
* eliminate cache_lookup_offset() usage.
* fix is mounted check on non existent path.
* simplify cache_get_parent().
* set offset parent in update_offset_entry().
* remove redundant variables from mount_autofs_offset().
* remove unused parameter form do_mount_autofs_offset().
* refactor umount_multi_triggers().
* eliminate clean_stale_multi_triggers().
* simplify mount_subtree() mount check.
* fix mnts_get_expire_list() expire list construction.
* fix inconsistent locking in umount_subtree_mounts().
* fix return from umount_subtree_mounts() on offset list delete.
* pass mapent_cache to update_offset_entry().
* fix inconsistent locking in parse_mount().
* remove unused mount offset list lock functions.
* eliminate count_mounts() from expire_proc_indirect().
* eliminate some strlen calls in offset handling.
* don't add offset mounts to mounted mounts table.
* reduce umount EBUSY check delay.
* cleanup cache_delete() a little.
* rename path to m_offset in update_offset_entry().
* don't pass root to do_mount_autofs_offset().
* rename tree implementation functions.
* add some multi-mount macros.
* remove unused functions cache_dump_multi() and cache_dump_cache().
* add a len field to struct autofs_point.
* make tree implementation data independent.
* add mapent tree implementation.
* add tree_mapent_add_node().
* add tree_mapent_delete_offsets().
* add tree_mapent_traverse_subtree().
* fix mount_fullpath().
* add tree_mapent_cleanup_offsets().
* add set_offset_tree_catatonic().
* add mount and umount offsets functions.
* switch to use tree implementation for offsets.
* remove obsolete functions.
* remove redundant local var from sun_mount().
* use mount_fullpath() in one spot in parse_mount().
* pass root length to mount_fullpath().
* remove unused function master_submount_list_empty().
* move amd mounts removal into lib/mounts.c.
* check for offset with no mount location.
* remove mounts_mutex.
* remove unused variable from get_exports().
* add missing free in handle_mounts().
* remove redundant if check.
* fix possible memory leak in master_parse().
* fix possible memory leak in mnts_add_amdmount().
* fix double unlock in parse_mount().
* add length check in umount_subtree_mounts().
* fix flags check in umount_multi().
* dont try umount after stat() ENOENT fail.
* remove redundant assignment in master_add_amd_mount_section_mounts().
* fix dead code in mnts_add_mount().
* fix arg not used in error print.
* fix missing lock release in mount_subtree().
* fix double free in parse_mapent().
* refactor lookup_prune_one_cache() a bit.
* cater for empty mounts list in mnts_get_expire_list().
* add ext_mount_hash_mutex lock helpers.
* fix amd section mounts map reload.
* fix dandling symlink creation if nis support is not available.
* dont use AUTOFS_DEV_IOCTL_CLOSEMOUNT.
* fix lookup_prune_one_cache() refactoring change.
* fix amd hosts mount expire.
* fix offset entries order.
* use mapent tree root for tree_mapent_add_node().
* eliminate redundant cache lookup in tree_mapent_add_node().
* fix hosts map offset order.
* fix direct mount deadlock.
* add missing description of null map option.
* fix nonstrict offset mount fail handling.
* fix concat_options() error handling.
* eliminate some more alloca usage.
* use default stack size for threads.
* fix use of possibly NULL var in lookup_program.c:match_key().
* fix incorrect print format specifiers in get_pkt().
* add mapent path length check in handle_packet_expire_direct().
* add copy length check in umount_autofs_indirect().
* add some buffer length checks to master map parser.
* add buffer length check to rmdir_path().
* eliminate buffer usage from handle_mounts_cleanup().
* add buffer length checks to autofs mount_mount().
* make NFS version check flags consistent.
* refactor get_nfs_info().
- drop autofs-5.1.7-Fix-option-for-master_read_wait.patch,
autofs-5.1.7-use-default-stack-size-for-threads.patch: upstream
==== autoyast2 ====
Version update (4.4.25 -> 4.4.26)
Subpackages: autoyast2-installation
- Fix handling of add-on signature settings, introduced when fixing
bsc#1192437 (bsc#1194881).
- 4.4.26
==== avahi ====
Subpackages: libavahi-client3 libavahi-common3 libavahi-core7
- Reinstate avahi-0.6.31-systemd-order.patch (boo#1194561).
This can probably go away if/when gh#lathiat/avahi#118 is fixed.
- Drop avahi-0.6.32-suppress-resolv-conf-warning.patch: we should
no longer need this given the above patch.
- Add several patches from git:
0001-man-fix-reference-to-avahi-autoipd.action-8-in-avahi.patch
0005-avahi-dnsconfd.service-Drop-Also-avahi-daemon.socket.patch
0006-man-add-missing-bshell.1-symlink.patch
0007-Ship-avahi-discover-1-bssh-1-and-bvnc-1-also-for-GTK.patch
0009-fix-bytestring-decoding-for-proper-display.patch 0010-avahi_dns_packet_consume_uint32-fix-potential-undefi.patch
- Build manpages with xmltoman. Currently needed for bssh.
- Minor spec file clean-up.
- Require python-rpm-macros for all builds (boo#1194744 boo#1194745).
==== bind ====
Version update (9.16.24 -> 9.16.25)
Subpackages: bind-doc bind-utils python3-bind
- Upgrade to release 9.16.25
This upgrade fixes the following bugs:
* Enforce enqueuing TCP resumeread to prevent the next read
callback from being executed before the current read callback
has finished, and the worker receive buffer has been marked as
"freed".
* Allow replacing expired zone signatures with signatures created
by the KSK.
* An assertion could occur if a catalog zone event was scheduled
while the task manager was being shut down.
* Defer detaching from zone->raw in zone_shutdown() if the zone
is in the process of being dumped to disk, to ensure that the
unsigned serial number information is always written in the
raw-format header of the signed version on an inline-signed
zone.
* named could leak memory when two dnssec-policy clauses had the
same name. named failed to log this error.
* Add a missing isc_condition_destroy() for nmsocket condition
variable and add missing isc_mutex_destroy() for nmworker lock.
[bind-9.16.25.tar.xz, bind-9.16.25.tar.xz.sha512.asc]
- Added /var/log to the ReadWritePaths as some log files are
written there:
* dump-file "/var/log/named_dump.db"
* statistics-file "/var/log/named.stats"
[bsc#1194721, vendor-files.tar.bz2]
==== btrfsprogs ====
Subpackages: btrfsprogs-udev-rules libbtrfs0
- add python-rpm-macros (bsc#1194748)
- spec: also provide btrfs-progs as it's common package name in other distros
- spec: clean up conditionals for < 12 versions
- spec: let SLE12 build again (conditional dependency of libreiserfscore)
- Removed patches: sles11-defaults.h (no SLE11 compatibility anymore)
- Added patches: btrfs-progs-kerncompat-add-local-definition-for-alig.patch
(fix build on SLE12/SLE15)
- Update to 5.16
* rescue: new subcommand clear-uuid-tree to fix failed mount due to bad uuid
subvolume keys, caught by tree-checker
* fi du: skip inaccessible files
* prop: properly resolve to symlink targets
* send, receive: fix crash after parent subvolume lookup errors
* build:
* fix build on 5.12+ kernels due to changes in linux/kernel.h
* fix build on musl with old kernel headers
* other:
* error handling fixes, cleanups, refactoring
* extent tree v2 preparatory work
* lots of RST documentation updates (last release with asciidoc sources),
https://btrfs.readthedocs.io
- Update to 5.15.1
* fi usage: fix wrongly reported space of used or unallocated space
* fix detection of block device discard capability
* check: add more sanity checks for checksum items
* build: make sphinx optional backend for documentation
- Update to 5.15
* mkfs: new defaults!
* no-holes
* free-space-tree
* DUP for metadata unconditionally
* libbtrfsutil: add missing profile defines
* libbtrfs: minimize its impact on the other code, refactor and separate
implementation where needed, cleanup afterwards, reduced header exports
* documentation: introduce sphinx build and RST versions of manual pages,
will become the new format and replace asciidoc
* fixes: warning regarding v1 space cache when only v2 (free space tree) is
enabled
- Update to 5.14.1
* fixes
* zoned mode
* properly detect non-zoned devices in emulation mode
* properly create quota tree
* raid1c3/4 also excluded from unsupported profiles
* use sysfs-based detection of device discard capability, fix mkfs-time trim
for non-standard devices
* mkfs: fix creation of populated filesystem with free space tree
* detect multipath devices (needs libudev)
* replace start: add option -K/--nodiscard, similar to what mkfs or device add has
* dump-tree: print complete root_item
* mkfs: add option --verbose
* sb-mod: better help, no checksum calculation on read-only actions
* subvol show:
* print more information (regarding send and receive)
* print warning if read-write subvolume has received_uuid set
* property set:
* add parameter -f to force changes
* changing ro->rw switch now needs -f if subvolume has received_uuid set,
(see documentation)
* build: optional libudev (on by default)
* other
* remove deprecated support for CREATE_ASYNC bit for subvolume ioctl
* CI updates
* new and updated tests
- Update patch: mkfs-default-features.patch (add stub define for new defaults)
- Update to 5.14.1
* fixes:
* defrag: fix parsing of compression (option -c)
* add workaround for old kernels when reading zone sizes
* let only check and restore open the fs with transid failures, namely
preventing btrfstune to do so
* convert: --uuid copy does not fail on duplicate uuids
- Update to 5.14
* convert:
* new option --uuid to copy, generate or set a given uuid
* improve output
* mkfs:
* allow to create degenerate raid0 (on 1 device) and raid10 (on 2 devices)
* image:
* improved error messages
* fix some alignment of restored image
* subvol delete: allow to delete by id when path is not resolvable
* check:
* require alignment of nodesize for 64k page systems
* detect and fix invalid block groups
* libbtrfs (deprecated):
* remove most exported symbols, leave only a few that are used by snapper
* no version change (still 0.1)
* remove btrfs-list.h, btrfsck.h
* fixes:
* reset generation of space v1 if v2 is used
* fi us: don't wrongly report missing device size when partition is not readable
* other:
* build: experimental features
* build: better detection of 64bit timestamp support for ext4
* corrupt-block: block group items
* new and updated tests
* refactoring
* experimental features:
* new image dump format, with data
- Update to 5.13.1
* build: fix build on musl libc due to missing definition of NAME_MAX
* check:
* batch more work into one transaction when clearing v1 free space inodes
* detect directoris with wrong number of links
* libbtrfsutil: fix race between subvolume iterator and deletion
* mkfs: be more specific about supported profiles for zoned device
* other:
* documentation updates
- Update to 5.13
* restore: remove loop checks for extent count and directory scan
* inspect dump-tree: new options to print node (--csum-headers) and data
checksums (--csum-items)
* fi usage:
* print stripe count for striped profiles
* print zoned information: size, total unusable
* mkfs: print note about sha256 accelerated module loading issue
* check: ability to reset dev_item::bytes_used
* fixes
* detect zoned kernel support at run time too
* exclusive op running check return value
* fi resize: support cancel (kernel 5.14)
* device remove: support cancel (kernel 5.14)
* documentation about general topics
* compression
* zoned mode
* storage model
* hardware considerations
* other
* libbtrfsutil API overview
* help text fixes and updates
* hash speedtest measure time, cycles using perf and print throughput
- Add --disable-zoned for leap
- revert previous change, unintentionally disables zstd on tumbleweed
- Fix build for leap
* --disable-zstd if leap < 42.3
* --disable-zoned for leap
- Update to 5.12.1
* build: fix missing symbols in libbtrfs
* mkfs: check for minimal number of zones
* check: fix warning about cache generation when free space tree is enabled
* fix superblock write in zoned mode on 16K pages
- Update to 5.12
* libbtrfsutil: relicensed to LGPL v2.1+
* mkfs: zoned mode support (kernel 5.12+)
* fi df: show zone_unusable per profile type in zoned mode
* fi usage: show total amount of zone_unusable
* fi resize: fix message for exact size
* image: fix warning and enlarge output file if necessary
* core
* refactor chunk allocator for more modes
* implement zoned mode support: allocation and writes, sb log
* crypto/hash refactoring and cleanups
* refactoring and cleanups
* other
* test updates
* CI updates
* travis-ci integration disabled
* docker images updated, more coverage
* incomplete build support for Android removed
* doc updates
* chattr mode m for 'NOCOMPRESS"
* swapfile used from fstab
* how to add a new export to libbtrfsutil
* update status of mount options since 5.9
- Update to 5.11.1
* properly format checksums when a mismatch is reported
* check: fix false alert on tree block crossing 64K page boundary
* convert:
* refuse to convert filesystem with 'needs_recovery'
* update documentation to require fsck before conversion
* balance convert: fix raid56 warning when converting other profiles
* fi resize: improved summary
* other
* build: fix checks and autoconf defines
* fix symlink paths for CI support scripts
* updated tests
- Update to 5.11
* fix device path canonicalization for device mapper devices
* receive: remove workaround for setting capabilities, all stable kernels
have been patched
* receive: fix duplicate mount path detection
* rescue: new subcommand create-control-device
* device stats: minor fix for plain text format output
* build: detect if e2fsprogs support 64bit timestamps
* build: drop libmount, required functionality has been reimplemented
* mkfs: warn when raid56 is used
* balance convert: warn when raid56 is used
* other
* new and updated tests
* documentation updates
* seeding device
* raid56 status
* CI updates
* docker images for various distros
- Update to 5.10.1
* static build works again
* other:
* add a way to test static binaries with the testsuite
* clarify scrub docs
* update dependencies, minimum version for libmount is 2.24, this may
change in the future
- Update to 5.10
* scrub status:
* print percentage of progress
* add size unit options
* fi usage: also print free space from statfs
* convert: copy full 64 bit timestamp from ext4 if availalble
* check:
* add ability to repair extent item generation
* new option to remove leftovers from inode number cache (-o inode_cache)
* check for already running exclusive operation (balance, device add/...)
when starting one
* preliminary json output support for 'device stats'
* fixes:
* subvolume set-default: id 0 correctly falls back to toplevel
* receive: align internal buffer to allow fast CRC calculation
* logical-resolve: distinguish -o subvol and bind mounts
* build: new dependency libmount
* other
* doc fixes and updates
* new tests
* ci on gitlab temporarily disabled
* debugging output enhancements
- prepare usrmerge (boo#1029961)
- Update to 5.9:
* mkfs:
* switch default to single profile for multi-device filesystem, up to
now it was raid0 that may not be simple to convert to some other profile
as raid0 needs a workspace on all device for that
* new option -R for run-time options (eg. mount time enabled), now
understands free-space-tree
* subvolume delete:
* refuse to delete the default subvolume (kernel will not allow that but
the error reason is not obvious)
* warn on EPERM, eg. if send is on progress on the subvolume
* convert:
* fix 32bit overflows on large filesystems
* improved error handling and error messages
* check free space taking fragmentation into account
* check:
* detect and repair wrong inode generation
* minor improvement in error reporting on roots
* libbtrfsutils: follow main package versioning (5.9)
* add pkg-config file definitions
* python-btrfsutil: follow main package versioning (5.9)
* inspect tree-stats: print node counts for each level, fanout
* other:
* docs:
* remove obsolete mount options (alloc_start, subvolrootid)
* deleting default subvolume is not permitted
* updated or fixed tests
* .editorconfig updates
* move files to kernel-shared/
* CI:
* updated to use zstd 1.4.5
* fix reiserfs build
* more builds with asan, ubsan
* sb-mod updates
* build:
* print .so versions of libraries in configure summary
- Update to 5.7:
* mkfs:
* new option to enable features otherwise enabled at runtime, now
implemented for quotas, 'mkfs.btrfs -R quota'
* fix space accounting for small image, DUP and --rootdir
* option -A removed
* check: detect ranges with overlapping csum items
* fi usage: report correct numbers when plain RAID56 profiles are used
* convert: ensure the data chunks size never exceed device size
* libbtrfsutil: update documentation regarding subvolume deletion
* build: support libkcapi as implementation backend for cryptographic
primitives
* core: global options for verbosity (-v, -q), subcommands -v or -q are
aliases and will continue to work but are considered deprecated,
current command output is preserved to keep scripts working
* other:
* build warning fixes
* btrfs-debugfs ported to python 3
- Update to 5.6.1:
* print warning when multiple block group profiles exist, update 'fi usage'
summary, add docs to maual page explaining the situation
* build: optional support for libgcrypt or libsodium, providing hash
implementations
* updated docs
- Fix content of _dracutmodulesdir variable: this definitively does
not belong to libexecdir.
- Update to 5.6:
* inspect logical-resolve: support LOGICAL_INO_V2 as new option '-o',
helps advanced dedupe tools
* inspect: user larger buffer (64K) for results
* subvol delete: support deletion by id (requires kernel 5.7+)
* dump-tree: new option --hide-names, replace any names
(file, directory, subvolume, xattr) in the output with stubs
* various fixes
- Update to 5.4.1
* build: fix docbook5 build
* check: do extra verification of extent items, inode items and chunks
* qgroup: return ENOTCONN if quotas not running (needs updated kernel)
* other: various test fixups
- BuildRequire pkgconfig(udev) instead of udev: Allow OBS to
shortcut through the -mini flavor.
- Use pkg-config --modversion udev to identify the current udev
version. This is more portable and supports the -mini flavors.
- Update to 5.4
* support new hash algorithms (kernel 5.5):
* mkfs.btrfs and btrfs-convert with --csum, crc32c, xxhash, sha256, blake2
* mkfs: support new raid1c3 and raid1c4 block group profiles (kernel 5.5)
* check:
* --repair delays start with a warning, can be skipped using --force
* enhanced detetion of inode types from partial data, more options for
repair
* receive: fix quiet option
* image: speed up chunk loading
* fi usage:
* sort devices by id
* print ratio of used/total per block group type
* rescue zero-log: reset the log pointers directly, avoid reading some other
potentially damaged structures
* new make target install-static to install only static binaries/libraries
* other
* docs updates
* new tests
* cleanups and refactoring
- Update to 5.3.1:
* libbtrfs: fix link breakage due to missing symbols
- Updaet to 5.3:
* mkfs:
* new option to specify checksum algorithm (only crc32c)
* fix xattr enumeration
* dump-tree: BFS (breadth-first) traversal now default
* libbtrfsutil: remove stale BTRFS_DEV_REPLACE_ITEM_STATE_x defines
* ci: add support for gitlab
* other:
* preparatory work for more checksum algorithms
* docs update
* switch to docbook5 backend for asciidoc
* fix build on uClibc due to missing backtrace()
* lots of printf format fixups
- Enable build of python-bindings for libbtrfsutil
- Update to 5.2.2:
* check:
* fix false report of wrong byte count for orphan inodes
* option -E was not handled correctly
* new check and repair for root item generation
* balance: check for full-balance before background fork
* mkfs: check that total device size does not overflow 16EiB
* dump-tree: print DEV_STATS key type
* other:
* new and updated tests
* doc fixups and updates
- update to 5.2.1
* scrub status: fix ETA calculation after resume
* check: fix crash when using -Q
* restore: fix symlink owner restoration
* mkfs: fix regression with mixed block groups
* core: fix commit to process all delayed refs
* other:
* minor cleanups
* test updates
- update to 5.2
* subvol show: print qgroup information when available
* scrub:
* status: show ETA, revamp the whole output
* fix reading/writing of last position on resume/cancel, potentially
skipping part of the filesystem on next resume
* dump-tree: add new option --noscan to use only devices given on the
commandline
* all-in-one binary (busybox style) with mkfs.btrfs, btrfs-image,
btrfs-convert, btrfstune
* image: fix hang when there are more than 32 cpus online and compression is
requested
* convert: fix some false ENOSPC errors when --rootdir is used
* build: fix gcc9 warnings
* core changes
* command handling cleanups
* dead code removal
* cmds-* files moved to cmds/
* other shared userspace files moved to common/
* utils.c split into more files
* preparatory work for more output formats
* libbtrfsutil: fix unaligned access
* other
* new and updated tests
* fix tests so CI passes again
* sb-mod can modify more superblock items
- update to version 5.1
* repair: flush/FUA support to avoid breaking metadata COW
* file extents repair no longer relies on data in extent tree
* lowmem: fix false error reports about gaps between extents
* add inode mode check and repair for various objects
* add check for invalid combination of nocow/compressed extents
* device scan option to forget scanned devices [new]
* mkfs: use same chunk size as kernel for initial creation
* dev-repace: better report when other exclusive operation runs
* help for sntax errors on command lines, print relevant msgs
* defrag: able to open files in RO mode
* dump-tree: --block can be specified multiple times
- update to version 4.20.2
* dump-super: minor output fixup
* revert fix for prefix detection of receive path, this is temporary and
unbreaks existing user setups
- Use correct path for dracut-fsck-help.txt in module-setup.sh (bsc#1122539)
* Remove module-setup.sh
* Add module-setup.sh.in
- Advise user of fs recovery options when we fail to mount (fate#320443,
bsc#1122539)
* Add dracut-fsck-help.txt
* Add module-setup.sh
- update to version 4.20.1
* libbtrfs: fix build of external tools due to missing symbols
* ci: enable library test
- update to version 4.20
* new feature: metadata uuid
* lightweight change of UUID without rewriting all metadata
(incompatible change)
* done by btrfstune -m/-M, needs kernel support, 5.0+
* image:
* fix block groups when restoring from multi-device image
* only enlarge result image if it's a regular file
* check
* more device extent checks and fixes
* can repair dir item with mismatched hash
* mkfs: uuid tree created with proper contents
* fix mount point detection due to partial prefix match
* other:
* new tests, build fixes, doc updates
* libbtrfsutil: fix tests if kernel lacks support for new
subvolume ioctls
- partial cleanup with spec-cleaner
- drop 0001-btrfs-progs-Add-support-for-metadata_uuid-field.patch
- drop 0002-btrfs-progs-btrfstune-Add-support-for-changing-the-u.patch
- drop 0003-btrfs-progs-Remove-fsid-metdata_uuid-fields-from-fs_.patch
- drop 0004-btrfs-progs-Remove-btrfs_fs_info-new_fsid.patch
- drop 0005-btrfs-progs-Directly-pass-root-to-change_devices_uui.patch
- Use %license instead of %doc [bsc#1082318]
- Implement fate#325871
* Added 0001-btrfs-progs-Add-support-for-metadata_uuid-field.patch
* Added 0002-btrfs-progs-btrfstune-Add-support-for-changing-the-u.patch
* Added 0003-btrfs-progs-Remove-fsid-metdata_uuid-fields-from-fs_.patch
* Added 0004-btrfs-progs-Remove-btrfs_fs_info-new_fsid.patch
* Added 0005-btrfs-progs-Directly-pass-root-to-change_devices_uui.patch
- update to version 4.19.1
* check
* many lowmem mode improvements
* properly report qgroup mismatch errors
* check symlinks with append/immutable flags
* fi usage
* correctly calculate allocated/unallocated for raid10
* minor output updates
* mkfs
* detect ENOSPC on thinly provisioned devices
* fix spurious EEXIST during directory traversal
* restore: fix relative path for restore target
* dump-tree: print symbolic tree names for backrefs
* send: fix regression preventing send -p with subvolumes mounted on "/"
* corrupt-tree: refactoring and command line updates
* build
* make it work with e2fsprogs < 1.42 again
* restore support for autoconf 2.63
* detect if -std=gnu90 is supported
* other
* new tests
* cleanups
- update to version 4.19
* check: support repair of fs with free-space-tree feature
* core:
* port delayed ref infrastructure from kernel
* support write to free space tree
* dump-tree: new options for BFS and DFS enumeration of b-trees
* quota: rescan is now done automatically after 'assign'
* btrfstune: incomplete fix to uuid change
* subvol: fix 255 char limit checks
* completion: complete block devices and now regular files too
* docs:
* ship uncompressed manual pages
* btrfsck uses a manual page link instead of symlink
* other
* improved error handling
* docs
* new tests
- update to version 4.17.1
* check:
* add ability to fix wrong ram_bytes for compressed inline files
* beautify progress output
* btrfstune: allow to continue uuid change after unclean interruption
* several fuzz fixes:
* detect overalpping chunks
* chunk loading error handling
* don't crash with unexpected root refs to extents
* relax option parsing again to allow mixing options and non-options
arguments
* fix qgroup rescan status reporting
* build:
* drop obsolete dir-test
* new configure option to disable building of tools
* add compatibility options --disable-static and --disable-shared
* other:
* cleanups and preparatory work
* new test images
- spec cleanup
- update to version 4.17
* check
* many lowmem mode improvements
* properly report qgroup mismatch errors
* check symlinks with append/immutable flags
* fi usage
* correctly calculate allocated/unallocated for raid10
* minor output updates
* mkfs
* detect ENOSPC on thinly provisioned devices
* fix spurious EEXIST during directory traversal
* restore: fix relative path for restore target
* dump-tree: print symbolic tree names for backrefs
* send: fix regression preventing send -p with subvolumes mounted on "/"
* corrupt-tree: refactoring and command line updates
* build
* make it work with e2fsprogs < 1.42 again
* restore support for autoconf 2.63
* detect if -std=gnu90 is supported
- Removed patches (upstreamed):
* 0001-btrfs-progs-convert-fix-support-for-e2fsprogs-1.42.patch
* 0002-btrfs-progs-build-autoconf-2.63-compatibility.patch
* 0003-btrfs-progs-build-detect-whether-std-gnu90-is-suppor.patch
- Don't require libzstd-devel-static on builds that don't use it.
- fix installation of btrfs.5.gz
- Fix building on SLE11:
* btrfs-progs: convert: fix support for e2fsprogs < 1.42
* btrfs-progs: build: detect whether -std=gnu90 is supported
* btrfs-progs: build: autoconf 2.63 compatibility
* Fixed mismerged addition of libbtrfsutil1 package description
- Added patches:
* 0001-btrfs-progs-convert-fix-support-for-e2fsprogs-1.42.patch
* 0002-btrfs-progs-build-autoconf-2.63-compatibility.patch
* 0003-btrfs-progs-build-detect-whether-std-gnu90-is-suppor.patch
- update to version 4.16.1
* remove obsolete tools: btrfs-debug-tree, btrfs-zero-log, btrfs-show-super,
btrfs-calc-size
* sb-mod: new debugging tool to edit superblock items
* mkfs: detect if thin-provisioned device does not have enough space
* check: don't try to verify checksums on metadata dump images
* build: fail documentation build if xmlto is not found
* build: fix build of btrfs.static
- Remove patch: 0001-btrfs-progs-build-fix-static-build.patch (upstream)
- Update initrd script
- update to version 4.16
* libbtrfsutil - new LGPL library to wrap userspace functionality
* several 'btrfs' commands converted to use it:
* properties
* filesystem sync
* subvolume set-default/get-default/delete/show/sync
* python bindings, tests
* build
* use configured pkg-config path
* CI: add python, musl/clang, built dependencies caching
* convert: build fix for e2fsprogs 1.44+
* don't install library links with wrong permissions
* fixes
* prevent incorrect use of subvol_strip_mountpoint
* dump-super: don't verify csum for unknown type
* convert: fix inline extent creation condition
* check:
* lowmem: fix false alert for 'data extent backref lost for snapshot'
* lowmem: fix false alert for orphan inode
* lowmem: fix false alert for shared prealloc extents
* mkfs:
* add UUID and otime to root of FS_TREE - with the uuid, snapshots will
be now linked to the toplevel subvol by the parent UUID
* don't follow symlinks when calculating size
* pre-create the UUID tree
* fix --rootdir with selinux enabled
* dump-tree: add option to print only children nodes of a given block
* image: handle missing device for RAID1
* other
* new tests
* test script cleanups (quoting, helpers)
* tool to edit superblocks
* updated docs
- Add patch: 0001-btrfs-progs-build-fix-static-build.patch
- Add new library packages: libbtrfsutil
- use documentation shipped by upstream tar, reduce dependencies
- enable static build again, zstd now has static version
- update to version 4.15
* mkfs --rootdir reworked, does not minimize the final image but can be still
done using a new option --shrink
* fix allocation of system chunk, don't allocate from the reserved area
* other
* new and updated tests
* cleanups, refactoring
* doc updates
- spec: fix distro version condition
- update to version 4.14.1
* dump-tree: print times of root items
* check: fix several lowmem mode bugs
* convert: fix rollback after balance
* other
* new and updated tests, enabled lowmem mode in CI
* docs updates
* fix travis CI build
* build fixes
* cleanups
- update to version 4.14
* build: libzstd now required by default
* check: more lowmem mode repair enhancements
* subvol set-default: also accept path
* prop set: compression accepts no/none, same as ""
* filesystem usage: enable for filesystem on top of a seed device
* rescue: new command fix-device-size
* other
* new tests
* cleanups and refactoring
* doc updates
- Removed patches:
- rollback-regression-fix.patch - upstreamed
- spec: disable static build, missing libzstd-devel-static
- spec: disable zstd support for non-Tumbleweed distros
- Fix rollback regression which can lead to data corruption
Added patches: rollback-regression-fix.patch (bsc#1069478)
- Escape the usage of %{VERSION} when calling out to rpm.
RPM 4.14 has %{VERSION} defined as 'the main packages version'.
- Add dependencies for libreiserfscore0 3.6.27 or newer (bsc#1071085).
- update to version 4.13.3:
* check: fix --force, wrong check for a mounted block device
* build: fix --with-convert parsing
* subvol list: don't list TOPLEVEL
* other: update tests
- update to version 4.13.2:
* subvol list:
* don't list toplevel subvolume among deleted (broken since 4.8.3)
* minor adjustments of uuid print format
* subvol delete:
* fix swapped behaviour of --commit-each and --commit-after
* fix potentially lost sync if subvolumes are from different filesystems
* check: add cache for metadata blocks, should improve performance
* other:
* new tests, testsuite updates
* doc updates
* cleanups
- update to version 4.13.1:
* image: speed up generating the sanitized names, do not generate unprintable chars
* completion: add missing commands, better mount point detection
* restore: add zstd support; libzstd detected automatically, will be
requested by default in the future, or can be configured out
* other:
* misc fixes found by sparse
* doc enhancements, ioctl manual page started
* updated and new tests
* build fixes
- update to version 4.13:
* convert: reiserfs support
* check: new option --force to allow check of a mounted filesystem (no repair)
* mkfs: --rootdir will now copy special files
* dump-tree: minor output changes
* inspect rootid: accept file as arugment
* dev usage: don't calculate slack space for missing devices
* fi du: don't print error on EMPTY_SUBVOL (inode number 2)
* build:
* fixed support for sanitization features on gcc (tsan, asan, ubsan)
* fix PIE build
* other:
* misc cleanups and stability fixes
* travis CI enhancements
* new tests, fuzzed images
* testsuite cleanups
- Removed patches:
- 0163-btrfs-progs-fsck-fix-segfault.patch - will be upstreamed
- local-version-override.patch - not needed anymore
- btrfs-support-pie.patch - upstremed
- Removed patches:
- 0167-Btrfs-progs-make-find_and_setup_root-return-an-error.patch
- 0168-Btrfs-progs-don-t-bug-out-if-we-can-t-find-the-last-.patch
- update to 4.12.1
* build:
* fix cross-compilation
* use gnu90 explicitly
* dump-tree: more relaxed checks so -b can print block on a damaged fs
* convert: fix the 1MB range exclusion
* check: more dir_item hash checks
* other
* added missing getopt spec for some options
* doc fixes
* cleanups
* test updates
- update to 4.12
* subvol show: new options --rootid, --uuid to show subvol by the given spec
* convert: progress report fixes, found by tsan
* image: progress report fixes, found by tsan
* fix infinite looping in find-root, or when looking for free extents
* other:
* code refactoring
* docs updates
* build: ThreadSanitizer support
* tests: stricter checks for mounted filesystem
- update to -4.11.1
* image: restoring from multiple devices
* dev stats: make --check option work
* check: fix false alert with extent hole on a NO_HOLE filesystem
* check: lowmem mode, fix false alert in case of mixed inline and compressed
extent
* convert: work with large filesystems (many TB)
* convert: fix overwriting of eb header flags
* convert: do not clear NODATASUM flag in inodes when run with --no-datasum
* docs updates
* build: sync Android.mk with Makefile
* tests:
* new tests
* fix 008 and 009, shell quotation mistake
- update to 4.11
* receive: fix handling empty stream with -e (multi-stream)
* send dump: fix printing long file names
* stability fixes for: dump-super, print-tree, check
* option parser updates: global options are parsed before the subcommand name
(old xfstests will fail)
* new and updated tests
* documentation updates
- btrfs-support-pie.patch: remove CFLAGS usage from linker lines,
this will allow the default PIE support to work.
- update to 4.10.2
* check: lowmem mode fix for false alert about lost backrefs
* convert: minor bugfix
* library: fix build, misisng symbols, added tests
- update to 4.10.1
* receive: handle subvolume in path clone
* convert: rollback fixed (rewrite was needed to address previous design issues)
* build: fix build of 3rd party tools, missing <linux/sizes.h>
* dump-tree: print log trees
* other: new and updated tests
- update to 4.10
* send: dump output fixes: missing newlies
* check: several fixes for the lowmem mode, improved error reporting
* build
* removed some library deps for binaries that not use them
* ctags, cscope
* split Makefile to the autotool generated part and the rest, not needed
to autogen.sh after adding a file
* shared code: sync easy parts with kernel sources
* other
* lots of cleanups
* source file reorganization: convert, mkfs, utils
* lots of spelling fixes in docs, other updates
* more tests
- update to 4.9.1
* check:
* use correct inode number for lost+found files
* lowmem mode: fix false alert on dropped leaf
* size reports: negative numbers might appear in size reports during device
deletes (previously in EiB units)
* mkfs: print device being trimmed
* defrag: v1 ioctl support dropped
* quota: print message before starting to wait for rescan
* qgroup show: new option to sync before printing the stats
* other:
* corrupt-block enhancements
* backtrace and co. cleanups
* doc fixes
- update to 4.9
* check: many lowmem mode updates
* send: use splice syscall to copy buffer from kernel
* receive: new option to dump the stream in textual form
* convert:
* move sources to own directory
* prevent accounting of blocks beyond end of the device
* make it work with 64k sectorsize
* mkfs: move sources to own directory
* defrag: warns if directory used without -r
* dev stats:
* new option to check stats for non-zero values
* add long option for -z
* library: version bump to 0.1.2, added subvol_uuid_search2
* other:
* cleanups
* docs updates
- update to 4.8.5
* receive: fix detection of end of stream (error reported even for valid
streams)
* other:
* added test for the receive bug
* fix linking of library-test
- update to 4.8.4
* check: support for clearing space cache v2 (free-space-tree)
* send:
* more sanity checks (with tests), cleanups
* fix for fstests/btrfs/038 and btrfs/117 failures
* build:
* fix compilation of standalone ioctl.h, pull NULL definition
* fix library link errors introduced in 4.8.3
* tests:
* add more fuzzed images from bugzilla
* add bogus send stream checks
* fixups and enhancements for CI environment builds
* misc refinements and updates of testing framework
* other:
* move sources for btrfs-image to own directory
* deprecated and not build by default: btrfs-calc-size, btrfs-show-super
* docs updates
- update to 4.8.3
* check:
* support for clearing space cache (v1)
* size reduction of inode backref structure
* send:
* fix handling of multiple snapshots (-p and -c options)
* transfer buffer increased (should reduce number of context switches)
* reuse existing file for output (-f), eg. when root cannot create files (NFS)
* dump-tree:
* print missing items for various structures
* new: dev stats, balance status item
* sync key names with kernel (the persistent items)
* subvol show: now able to print the toplevel subvolume -- the creation time
might be wrong though
* mkfs:
* store the creation time of toplevel root inode
* print UUID in the summary
* build: travis CI for devel
* other:
* lots of cleanups and refactoring
* switched to on-stack path structure
* fixes from coverity, asan, ubsan
* new tests
* updates in testing infrastructure
* fixed convert test 005
- update to 4.8.2
* convert: also convert file attributes
* convert: fix wrong tree block alignment for unalianged block group
* check: quota verify fixes, handle reloc tree
* build: add stub for FIEMAP_EXTENT_SHARED, compiles on ancient kernels
* build: add stub for BUILD_ASSERT when ioctl.h is included
* dump-tree: don't crash on unrecognized tree id for -t
* tests:
* add more ioctl tests
* convert: more symlink tests, attribute tests
* quota verify for reloc tree
* other cleanups
- Add ability to provide site specific defaults for mkfs (FATE#320615).
* Only used for SLES11 defaults.
- Added patch mkfs-default-features.patch
- update to 4.8.1
* 32bit builds fixed
* build without backtrace support fixed
- update to 4.8
* error handling improvements all over the place
* new fuzzed images, test updates
* doc fixups
* minor cleanups and improvements
* kernel library helpers moved to own directory
* qgroup: fix regression leading to incorrect status after check,
introduced in 4.7
- update to 4.7.3
* fixed free space tree compat status
* check: low-mem mode: handle partially dropped snapshots
* dump-super: consolidate options for superblock copy
* tree-stats: check mount status
* subvol delete: handle verbosity option
* defrag: print correct error string
* mkfs: fix reading rotational status
* other:
* UBSAN build option
* documentation updates
* enhanced tests: convert, fuzzed images, more tools to run on fuzzed
images
- removed btrfsprogs-only-install-udev-rules-for-udev-190.patch: fix build
- update to 4.7.2
* check:
* urgent fix: false report of backref mismatches; do not --repair
last unaffected version 4.6.1 (code reverted to that state)
* fuzzing and fixes
* added more sanity checks for various structures
* testing images added
* build: udev compatibility: do not install .rules on version < 190
* other:
* dump-super: do not crash on garbage value in csum_type
* minor improvements in messages and help strings
* documentation:
* filesystem features
- Add new btrfsprogs-udev-rules package to contain the udev rules.
- Fix packaging for udev rules:
- btrfs builtin didn't exist prior to udev v190, so the rules must
depend on that version.
- Added patch:
* btrfsprogs-only-install-udev-rules-for-udev-190.patch
- update to 4.7.1
* check:
* new optional mode: optimized for low memory usage (memory/io tradeoff)
* --mode=lowmem, not default, still considered experimental
* does not work with --repair yet
* convert: regression fix, ext2_subvol/image rw permissions
* mkfs/convert:
* two-staged creation, partially created filesystem will not be recognized
* improved error handling (fewer BUG_ONs)
* convert: preparation for more filesystems to convert from
* documentation updates: quota, qgroup
* other
* message updates
* more tests
* more build options, enhanced debugging
- update to 4.7
* convert: fix creating discontig extents
* check: speed up traversing heavily reflinked extents within a file
* check: verify qgroups of higher levels
* check: repair can now fix wrong qgroup numbers
* balance: new option to run in the background
* defrag: default extent target size changed to 32MiB
* du: silently skip non-btrfs dirs/files
* documentation updates: btrfs(5), btrfs(8), balance, subvolume, scrub,
filesystem, convert
* bugfixes:
* unaligned access (reported for sparc64) in raid56 parity calculations
* use /bin/bash
* other stability fixes and cleanups
* more tests
- Removed patches:
* 0002-btrfs-progs-btrfsck-verify-qgroups-above-level-0.patch
* 0003-btrfs-progs-btrfsck-write-corrected-qgroup-info-to-d.patch
- update to 4.6.1
* fi resize: negative resize argument accepted again
* qgroup rescan: fix skipping when rescan is in progress
* mkfs: initialize stripesize to correct value
* testsuite updates, mostly convert tests
* documentation updates
* btrfs-device, btrfs-restore manual pages enhanced
* misc fixups
- update to 4.6
* convert - major rewrite:
* fix a long-standing bug that led to mixing data blocks into metadata block
groups
* the workaround was to do full balance after conversion, which was
recommended practice anyway
* explicitly set the lowest supported version of e2fstools to 1.41
* provide and install udev rules file that addresses problems with device
mapper devices, renames after removal
* send: new option: quiet
* dev usage: report slack space (device size minus filesystem area on the dev)
* image: support DUP
* build: short options to enable debugging builds
* other:
* code cleanups
* build fixes
* more tests and other enhancements
* Removed patches:
* 0001-btrfs-progs-free-qgroup-counts-in-btrfsck.patch
* 0169-btrfs-progs-udev-add-rules-for-dm-devices.patch
* btrfs-progs-no-PKG_CHECK_VAR
- btrfsck updates for qgroup verification and repair (fate#318144)
* We can now check all qgroup levels
* btrfsck will write out corrected qgroups when run with --repair
- Added patch: 0001-btrfs-progs-free-qgroup-counts-in-btrfsck.patch
- Added patch: 0002-btrfs-progs-btrfsck-verify-qgroups-above-level-0.patch
- Added patch: 0003-btrfs-progs-btrfsck-write-corrected-qgroup-info-to-d.patch
- update to 4.5.3
* ioctl: fix unaligned access in buffer from TREE_SEARCH; might cause SIGBUS
on architectures that do not support unaligned access and do not performa
any fixups
* improved validation checks of superblock and chunk-related structures
* subvolume sync: fix handling of -s option
* balance: adjust timing of safety delay countdown with --full-balance
* rescue super-recover: fix reversed condition check
* check: fix bytes_used accounting
* documentation updates: mount options, scrub, send, receive, select-super,
check, mkfs
* testing: new fuzzed images, for superblock and chunks
- fix build failure on 13.1: conditional default for udevdir
- fix build failure on SLE11SP4: wrong check in makefile
- Add udev rules for dm devices (bsc#912170 bsc#888215)
- Added patch: 0169-btrfs-progs-udev-add-rules-for-dm-devices.patch
- Added patch: btrfs-progs-no-PKG_CHECK_VAR
- update to 4.5.2
* new/moved command: btrfs-calc-stats -> btrfs inspect tree-stats
* check: fix false alert for metadata blocks crossing stripe boundary
* check: catch when qgroup numbers mismatch
* check: detect running quota rescan and report mismatches
* balance start: add safety delay before doing a full balance
* fi sync: is now silent
* fi show: don't miss filesystems with partially matching uuids
* dev ready: accept only one argument for device
* dev stats: print "devid:N" for a missing device instead of "(null)"
* other:
* lowest supported version of e2fsprogs is 1.41
* minor cleanups, test updates
- Removed patch: 2000-btrfs-full-balance-warning.diff
- update to 4.5.1
* mkfs: allow DUP on multidev fs
* fix static build
- update to 4.5
* new/moved commands
* btrfs-show-super -> btrfs inspect-internal dump-super
* btrfs-debug-tree -> btrfs inspect-internal dump-tree
* new commands
* btrfs fi du - calculate disk usage, including shared extents
* enhancements
* device delete - delete by id (needs kernel support, not merged to 4.6)
* check - new option to specify chunk root
* debug-tree/dump-tree - option -t understands human readable name of the
tree (along numerical ids)
* btrfs-debugfs - can dump block group information
* bugfixes
* all commands should accept the option separator "--"
* several fixes in device scan
* restore works on filesystems with sectorsize > 4k
* debug-tree/dump-tree - print compression type as string
* subvol sync: fix crash, memory corruption
* argument parsing fixes: subvol get-default, qgroup create/destroy/assign,
inspect subvolid-resolve
* check for block device or regular file in several commands
* other
* documentation updates
* manual pages for the moved tools now point to btrfs-filesystem
* testsuite updates
- Removed patch (upstream):
0001-btrfs-progs-libbtrfs-remove-max-min-macros-from-API.patch
- Recommend btrfsmaintenance
- hide min/max macros clashing with gcc 6 (bnc#966257)
(0001-btrfs-progs-libbtrfs-remove-max-min-macros-from-API.patch)
- update to 4.4.1
* find-root: don't skip the first chunk
* free-space-tree compat bits fix
* build: target symlinks
* documentation updates
* test updates
- update to 4.4
* mkfs.btrfs --data dup
* support balance filters added/enhanced in linux 4.4
* manual pages enhanced (btrfs, mkfs, mount, filesystem, balance)
* 'btrfs filesystem usage' works with mixed blockgroups
* build: installation to /usr/local
* build: the 'ar' tool is properly deteced during cross-compilation
* improved stability on fuzzed/crafted images when reading sys array in
superblock
* debug-tree: option -t understands ids for tree root and chnuk tree
* check: properly reset nlink of multi-linked file
* chunk recovery: fix floating point exception
* chunk recovery: endianity bugfix during rebuild
* mkfs with 64K pages and nodesize reported superblock checksum mismatch
- Removed patches:
* 0001-btrfs-progs-mkfs-use-correct-size-for-superblock-csu.patch
* fix-doc-build-on-SLE11SP3.diff
- Fix missing dependency on coreutils for initrd macros (boo#958562)
- Call missing initrd macro at post / postun (boo#958562)
- fix mkfs failure on ppc64 (or with sectorsize > 4k) (bsc#956819)
- Added patch: 0001-btrfs-progs-mkfs-use-correct-size-for-superblock-csu.patch
- update to 4.3.1
* fixes
* device delete: recognize 'missing' again
* mkfs: long names are not trimmed when doing ssd check
* support partitioned loop devices
* other
* replace several mallocs with on-stack variables
* more memory allocation failure handling
* add tests for bugs fixed
* cmd-device: switch to new message printing helpers
* minor code cleanups
- update to 4.3
* mkfs
* mixed mode is not forced for filesystems smaller than 1GiB
* mixed mode broken with mismatching sectorsize and nodesize, fixed
* print version info earlier
* print devices sorted by id
* do not truncate target image with --rootsize
* fi usage:
* don't print global block reserve
* print device id
* minor output tuning
* other cleanups
* calc-size:
* div-by-zero fix on an empty filesystem
* fix crash
* bugfixes:
* more superblock sanity checks
* consistently round size of all devices down to sectorsize
* misc leak fixes
* convert: don't try to rollback with a half-deleted ext2_saved subvolume
* other:
* check: add progress indicator
* scrub: enahced error message
* show-super: read superblock from a given offset
* add README
* docs: update manual page for mkfs.btrfs, btrfstune, balance, convert and inspect-internal
* build: optional build with more warnings (W=...)
* build: better support for static checkers
* build: html output of documentation
* pretty-print: last_snapshot for root_item
* pretty-print: stripe dev uuid
* error reporting wrappers, introduced and example use
* refactor open_file_or_dir
* other docs and help updates
* testing:
* test for nodes crossing stripes
* test for broken 'subvolume sync'
* basic tests for mkfs, raid option combinations
* basic tests for fuzzed images (check)
* command intrumentation (eg valgrind)
* print commands if requested
* add README for tests
- build btrfsprogs-static package for 13.2 and Factory, package
with static versions of the utilities, aimed for rescue environments
- update to 4.2.3
- subvol sync: make it actually work again
- scanning: do not scan already discovered filesystems (minor optimization)
- convert: better error message in case the filesystem is not finalized
- restore: off-by-one symlink path check fix
- update to 4.2.2
- fi label: use fallback if the label ioctl is not available
- convert: check nodesize constraints against commandline features (-O)
- scrub: report status 'running' until all devices are finished
- device scanning might crash in some scenarios
- fi usage: print summary for non-root users
- update to 4.2.1
- fix an off-by-one error in cross-stripe boundary check
- convert: don't write uninitialized data to image
- image: don't loop with option -t0
- image: don't create threads if compression is not requested
- Removed patches:
* 0001-btrfs-progs-fix-cross-stripe-boundary-check.patch
- make mkfs work with 64k nodesize again, notably fixes mkfs on ppc64
(bsc#945229)
- Added patch:
* 0001-btrfs-progs-fix-cross-stripe-boundary-check.patch
- version 4.2
* enhancements:
* mkfs: do not create extra single chunks on multiple devices
* resize: try to guess the minimal size, 'inspect min-dev-size'
* qgroup assign: add option to schedule rescan
* chunk-recover: be more verbose about the scanning process
* fixes:
* check:
* find stripes crossing stripe boundary -- created by convert
* print correct range for file hole when there are no extents
and learn how to fix it
* replace: more sanity checks
* convert: concurrency fixes related to reporting progress
* find-root: option -a will not skip the current root anymore
* subvol list: fix occasional crash
* do not create stripes crossing stripe boundary
* build:
* fixes for musl libc
* preliminary support for android (not working yet, more code changes needed)
* new EXTRA_CFLAGS and EXTRA_LDFLAGS
* other:
* lots of cleanups
* tests: lots of updates, new tests, framework improvements
* documentation updates
* debugging: print-tree shows stripe length
- Removed patches (upstreamed):
* 2104-get-min-size-for-resize.patch
* 2105-move-min-resize-implementation-to-inspec.patch
* 2106-inspect-add-command-min-dev-size.patch
- add warning before full balance starts (bsc#940467, fate#319317)
- Added patches:
2000-btrfs-full-balance-warning.diff
- Add feature to get minimum size a filesystem can be resized to
(FATE#317897).
- Added patches:
* 2104-get-min-size-for-resize.patch
* 2105-move-min-resize-implementation-to-inspec.patch
* 2106-inspect-add-command-min-dev-size.patch
- version 4.1.2
- mkfs: bugfix, previous version does not create entierly correct
filesystem (has to be recreated)
- version 4.1.1
* bugfixes
- defrag: threshold overflow fix
- fsck:
- check if items fit into the leaf space
- fix wrong nbytes
- mkfs:
- create only desired block groups for single device
- preparatory work for fix on multiple devices
* enhancements
- new alias for 'device delete': 'device remove'
* other
- fix compilation on old gcc (4.3)
- documentation updates
- debug-tree: print nbytes
- test: image for corrupted nbytes
- corupt-block: let it kill nbytes
- spec: drop libacl dependency
- version 4.1
* bugfixes
- fsck.btrfs: no bash-isms
- bugzilla 97171: invalid memory access (with tests)
- receive:
- cloning works with --chroot
- capabilities not lost
- mkfs: do not try to register bare file images
- option --help accepted by the standalone utilities
* enhancements
- corrupt block: ability to remove csums
- mkfs:
- warn if metadata redundancy is lower than for data
- options to make the output quiet (only errors)
- mixed case names of raid profiles accepted
- rework the output:
- more comprehensive, 'key: value' format
- subvol:
- show:
- print received uuid
- update the output
- new options to specify size units
- sync:
- grab all deleted ids and print them as they're removed,
previous implementation only checked if there are any
to be deleted - change in command semantics
- scrub: print timestamps in days HMS format
- receive:
- can specify mount point, do not rely on /proc
- can work inside subvolumes
- send:
- new option to send stream without data (NO_FILE_DATA)
- convert:
- specify incompat features on the new fs
- qgroup:
- show: distinguish no limits and 0 limit value
- limit: ability to clear the limit
- help for 'btrfs' is shorter, 1st level command overview
- debug tree: print key names according to their C name
* new
- rescure zero-log
- btrfsune:
- rewrite uuid on a filesystem image
- new option to turn on NO_HOLES incompat feature
* deprecated
- standalone btrfs-zero-log
* other
- testing framework updates
- uuid rewrite test
- btrfstune feature setting test
- zero-log tests
- more testing image formats
- manual page updates
- ioctl.h synced with current kernel uapi version
- convert: preparatory works for more filesystems (reiserfs pending)
- use static buffers for path handling where possible
- add new helpers for send uilts that check memory allocations,
switch all users, deprecate old helpers
- Makefile: fix build dependency generation
- map-logical: make it work again
- Install bash completion for btrfs.
- version 4.0
* resize:
* don't accept file as an argument (it's confusing)
* print better error message in case of an error
* restore: optionally restore metadata (time, mode, uid/gid)
* receive: optionally enforce chroot
* new rescue subcommand 'zero-log', same as btrfs-zero-log, but
now also part of the main utility
* check:
* free space checks match kernel, fixes incorrect reports
* convert: fix setting of checksum bit if --no-datasum is used
* fsck.btrfs: don't print messages
* fix quota rescan on PPC64 (mangled ioctl number)
* test updates
* documentation: files renamed to .asciidoc, misc fixups
- version 3.19.1
- convert:
- new option to specify metadata block size
- --no-progress actually works
- restore: properly handle the page boundary corner case
- build fixes:
- missing macro from public header, BTRFS_BUILD_VERSION
- wrong handling of --enable-convert
- fi usage: reports correct space for degraded mounts
- other:
- mkfs: help string updates
- completion: added 'usage' subcommands
- cleanups in qgroup code, preparatory work
- version 3.19
- btrfs-image
- restore can now run in parallel threads
- fixed restore of multiple image from multiple devices onto a single dev
- introduced metadump v2
- check
- make --init-csum-tree and --init-extent-tree work together
- find-new
- option to search through all metadata even if a root was already found
- convert
- show progress by default, can be turned off
- corrupt-block
- option to work on a specific root
- bash completion script for all subcommands
- spec: convert to autotools
Removed patch 0169-btrfs-progs-Check-metadata-mirrors-in-find-root.patch
- add COPYING
- version 3.18.2
* qgroup show: print human readable sizes, options to say otherwise
* check: new option to explicitly say no to writes
* mkfs: message about trimming is not printed to stderr
* fi show: fixed return value
* tests: new infrastructure
* btrfstune: force flag can be used together with seeding option
* backtrace support is back
* getopt cleanups
* doc and help updates
- version 3.18.1
- minor fixes
- documentation updates
- version 3.18
- mkfs - skinny-metadata feature is now on by default, first introduced in
kernel 3.10
- filesystem usage - give an overview of fs usage in a way that's more
comprehensible than existing 'fi df'
- device usage - more detailed information about per-device allocations
- check:
- option to set a different tree root byte number
- ability to link lost files to lost+found, caused by a recent kernel bug
- repair of severely corrupted fs (use with care)
- convert - option to show progress
- subvol create - print the commit mode inline, print the global mode only if --verbose
- other updates: musl-libc support, coverity bugfixes, new test images,
documentation
- Removed patches (upstreamed):
* 0010-btrfs-progs-move-group-type-and-profile-pretty-print.patch
* 0011-btrfs-progs-Enhance-the-command-btrfs-filesystem-df.patch
* 0012-btrfs-progs-Add-helpers-functions-to-handle-the-prin.patch
* 0013-btrfs-progs-Add-command-btrfs-filesystem-disk-usage.patch
* 0014-btrfs-progs-Add-btrfs-device-disk-usage-command.patch
* 0015-btrfs-progs-cleanup-dead-return-after-usage-for-fi-d.patch
* 0016-btrfs-progs-Fix-memleak-in-get_raid56_used.patch
* 0017-Btrfs-progs-fi-usage-free-memory-if-realloc-fails.patch
* 0019-btrfs-progs-add-original-df-and-rename-disk_usage-to.patch
* 0020-btrfs-progs-move-device-usage-to-cmds-device-more-cl.patch
* 0021-btrfs-progs-check-if-we-can-t-get-info-from-ioctls-d.patch
* 0022-btrfs-progs-zero-out-structures-before-calling-ioctl.patch
* 0024-btrfs-progs-Print-more-info-about-device-sizes.patch
* 0025-btrfs-progs-compare-unallocated-space-against-the-co.patch
* 0026-btrfs-progs-add-section-of-overall-filesystem-usage.patch
* 0027-btrfs-progs-cleanup-filesystem-device-usage-code.patch
* 0028-btrfs-progs-rework-calculations-of-fi-usage.patch
* 0029-btrfs-progs-replace-df_pretty_sizes-with-pretty_size.patch
* 0030-btrfs-progs-clean-up-return-codes-and-paths.patch
* 0031-btrfs-progs-move-global-reserve-to-overall-summary.patch
- version 3.17.3
- convert: fix conversion of sparse ext* filesystems
- show: resolve to the correct path
- fsck: more verbose error for root dir problems
- version 3.17.2
- check improvements
- add ability to replace missing dir item/dir indexes
- fix missing inode items
- create missing root dirid
- corrupt block: enhancements for testing fsck
- zero-log: able to reset a fs with bogus log tree pointer (bko#72151)
- package mkinitrd scripts conditionally (bsc#893577)
- spec: minor updates
- version 3.17.1
- fi df: argument handling
- fix linking with libbtrfs
- replace: better error reporting
- fi show: fixed stall if run concurrently with balance
- check: fixed argument parsing for --subvol-extents
- fi df: SI prefixes corrected
- Added patches:
* fix-doc-build-on-SLE11SP3.diff
- Removed patches:
* 0042-btrfs-progs-fix-linking-with-libbtrfs.patch
* 0043-btrfs-progs-libbtrfs-make-exported-headers-compatibl.patch
- Modified patches:
* 0011-btrfs-progs-Enhance-the-command-btrfs-filesystem-df.patch
* 0012-btrfs-progs-Add-helpers-functions-to-handle-the-prin.patch
* 0019-btrfs-progs-add-original-df-and-rename-disk_usage-to.patch
- version 3.17
- check: --init-csum-tree acutally does something useful, rebuilds the whole
csum tree
- /dev scanning for btrfs devices is gone
- /proc/partitions scanning is gone, blkid is used exclusively
- new subcommand subvolume sync
- filesystem df: new options to set unit format
- convert: allow to copy label from the origin, or specify a new one
- Modified patches:
* 0011-btrfs-progs-Enhance-the-command-btrfs-filesystem-df.patch
* 0012-btrfs-progs-Add-helpers-functions-to-handle-the-prin.patch
* 0013-btrfs-progs-Add-command-btrfs-filesystem-disk-usage.patch
* 0014-btrfs-progs-Add-btrfs-device-disk-usage-command.patch
* 0015-btrfs-progs-cleanup-dead-return-after-usage-for-fi-d.patch
* 0016-btrfs-progs-Fix-memleak-in-get_raid56_used.patch
* 0017-Btrfs-progs-fi-usage-free-memory-if-realloc-fails.patch
* 0019-btrfs-progs-add-original-df-and-rename-disk_usage-to.patch
* 0020-btrfs-progs-move-device-usage-to-cmds-device-more-cl.patch
* 0021-btrfs-progs-check-if-we-can-t-get-info-from-ioctls-d.patch
* 0022-btrfs-progs-zero-out-structures-before-calling-ioctl.patch
* 0024-btrfs-progs-Print-more-info-about-device-sizes.patch
* 0025-btrfs-progs-compare-unallocated-space-against-the-co.patch
* 0026-btrfs-progs-add-section-of-overall-filesystem-usage.patch
* 0027-btrfs-progs-cleanup-filesystem-device-usage-code.patch
* 0029-btrfs-progs-replace-df_pretty_sizes-with-pretty_size.patch
* 0030-btrfs-progs-clean-up-return-codes-and-paths.patch
* 0031-btrfs-progs-move-global-reserve-to-overall-summary.patch
- Added patches:
* 0010-btrfs-progs-move-group-type-and-profile-pretty-print.patch
* 0028-btrfs-progs-rework-calculations-of-fi-usage.patch
* 0042-btrfs-progs-fix-linking-with-libbtrfs.patch
* 0043-btrfs-progs-libbtrfs-make-exported-headers-compatibl.patch
- Removed patches:
* 0006-Btrfs-progs-fsck-clear-out-log-tree-in-repair-mode.patch
* 0007-Btrfs-progs-fsck-avoid-pinning-same-block-several-ti.patch
* 0008-Btrfs-progs-fsck-add-ability-to-check-reloc-roots.patch
* 0018-btrfs-progs-read-global-reserve-size-from-space-info.patch
* 0023-btrfs-progs-print-B-for-bytes.patch
* 0028-btrfs-progs-extend-pretty-printers-with-unit-mode.patch
* 0164-btrfs-progs-convert-set-label-or-copy-from-origin.patch
* 0171-btrfs-progs-make-free-space-checker-work-on-non-4k-s.patch
- version 3.16.2
- fsck: handle bad extent mapping
- image: make it work on a balanced fs
- btrfs-show-super: print flags in human readable way
- documentation updates
- version 3.16.1
- library version defines
- subvol list: -R to print received UUID
- fixed detection of multiple mounts on the same directory
- restore: misc fixes
- other fixes
- Modified patches (sync with pending upstream versions):
* 0011-btrfs-progs-Enhance-the-command-btrfs-filesystem-df.patch
* 0012-btrfs-progs-Add-helpers-functions-to-handle-the-prin.patch
* 0013-btrfs-progs-Add-command-btrfs-filesystem-disk-usage.patch
* 0018-btrfs-progs-read-global-reserve-size-from-space-info.patch
* 0020-btrfs-progs-move-device-usage-to-cmds-device-more-cl.patch
* 0024-btrfs-progs-Print-more-info-about-device-sizes.patch
* 0025-btrfs-progs-compare-unallocated-space-against-the-co.patch
* 0028-btrfs-progs-extend-pretty-printers-with-unit-mode.patch
* 0029-btrfs-progs-replace-df_pretty_sizes-with-pretty_size.patch
- Removed patch: library-version-defines.patch (upstream)
- send-stream API users updatd, drop the workaround
- Removed patch: send-stream-api-wokaround.patch
- workaround for send api breakage
- Added patch: send-stream-api-wokaround.patch
- add api versioning and package version.h (now 0.1.1)
- Added patches:
* library-version-defines.patch
- version 3.16
- show-super: skip unrecognized sb, add option to force
- debug-tree: print tree by id
- mkfs: new option to specify UUID
- receive: new option to limit number of errors
- check: new option to verify quotas
- check: reduced memory requirements
- check: new option to print extent sharing
- restore: check length before decompression
- restore: more error handling
- balance: new filter 'limit'
- recover: allow to read all sb copies
- restore: option to loop during restoring
- mkfs: drop experimental notice
- btrfstune: new option to force dangerous changes
- documentation updates
- Deleted patches (upstream):
* 0001-btrfs-progs-doc-fix-symlink-target-for-btrfsck.8.patch
* 0200-btrfs-progs-print-qgroup-excl-as-unsigned.patch
* 0201-btrfs-progs-import-ulist.patch
* 0202-btrfs-progs-add-quota-group-verify-code.patch
* 0203-btrfs-progs-show-extent-state-for-a-subvolume.patch
* 0204-btrfs-progs-ignore-orphaned-qgroups-by-default.patch
* btrfs-progs-canonicalize-pathnames-for-device-commands
- Refreshed patches:
* 0006-Btrfs-progs-fsck-clear-out-log-tree-in-repair-mode.patch
* 0011-btrfs-progs-Enhance-the-command-btrfs-filesystem-df.patch
* 0012-btrfs-progs-Add-helpers-functions-to-handle-the-prin.patch
* 0013-btrfs-progs-Add-command-btrfs-filesystem-disk-usage.patch
* 0028-btrfs-progs-extend-pretty-printers-with-unit-mode.patch
* 0164-btrfs-progs-convert-set-label-or-copy-from-origin.patch
- refresh references on the following patches:
* 0200-btrfs-progs-print-qgroup-excl-as-unsigned.patch
* 0201-btrfs-progs-import-ulist.patch
* 0202-btrfs-progs-add-quota-group-verify-code.patch
* 0203-btrfs-progs-show-extent-state-for-a-subvolume.patch
- btrfs-progs: ignore orphaned qgroups by default
- Added patch:
* 0204-btrfs-progs-ignore-orphaned-qgroups-by-default.patch
- btrfs-progs: show extent state for a subvolume (bnc#865621)
- Added patch:
* 0203-btrfs-progs-show-extent-state-for-a-subvolume.patch
- btrfs-progs: canonicalize pathnames for device commands (bnc#880486).
- Added patch:
* btrfs-progs-canonicalize-pathnames-for-device-commands
- fsck: fix checking on filesystems with large sectorsize (bnc#872286)
- Added patches:
* 0171-btrfs-progs-make-free-space-checker-work-on-non-4k-s.patch
- Do not package btrfs-find-root and btrfs-select-super by default.
- Removed printing byte number for every slot (bnc#872364).
- Removed patch:
* 0170-btrfs-progs-In-find-root-dump-bytenr-for-every-slot.patch
- update to upstream 3.14.2
- man: separate pages for all subcommands
- minor bugfixes
- spec: removed upstreamed patches, update build dependencies
- Added patches:
* 0001-btrfs-progs-doc-fix-symlink-target-for-btrfsck.8.patch
- Removed patches:
* 0001-Btrfs-progs-fix-check-to-test-trim-support.patch
* 0002-Btrfs-progs-fsck-fix-double-free-memory-crash.patch
* 0003-Btrfs-progs-mkfs-Remove-zero_end-1-since-it-has-been.patch
* 0004-btrfs-progs-fix-wrong-max-system-array-size-check-in.patch
* 0005-btrfs-progs-move-arg_strtou64-to-a-separate-file-for.patch
* 0009-btrfs-progs-prevent-close_root-if-the-root-to-close-.patch
* 0010-btrfs-progs-fix-mkfs.btrfs-segfault-with-features-op.patch
- add quota group verify patches, sent to list near end of the week starting
5/4/2014
- updates btrfsck with the ability to verify quota groups
- Update the changelog with some sad version of diffstat output to meet
requirements.
- Added patches:
* 0200-btrfs-progs-print-qgroup-excl-as-unsigned.patch
* 0201-btrfs-progs-import-ulist.patch
* 0202-btrfs-progs-add-quota-group-verify-code.patch
- add quota group verify patches, sent to list near end of the week starting
5/4/2014
- updates btrfsck with the ability to verify quota groups
- update to upstream 3.14.1
- mkfs:
- fix TRIM detection
- do not zero-out end of device unconditionally
- no crash with --features option
- fsck:
- clear log tree in repair mode
- check reloc roots
- btrfs - reworked space reporting (bnc#873106)
- btrfs fi usage - new command
- btrfs dev usage - new command
- btrfs fi df - enhanced output with GlobalReserve
- Removed patches:
* 0001-btrfs-progs-move-arg_strtou64-to-a-separate-file-for.patch
- Added patches:
* 0001-Btrfs-progs-fix-check-to-test-trim-support.patch
* 0002-Btrfs-progs-fsck-fix-double-free-memory-crash.patch
* 0003-Btrfs-progs-mkfs-Remove-zero_end-1-since-it-has-been.patch
* 0004-btrfs-progs-fix-wrong-max-system-array-size-check-in.patch
* 0005-btrfs-progs-move-arg_strtou64-to-a-separate-file-for.patch
* 0006-Btrfs-progs-fsck-clear-out-log-tree-in-repair-mode.patch
* 0007-Btrfs-progs-fsck-avoid-pinning-same-block-several-ti.patch
* 0008-Btrfs-progs-fsck-add-ability-to-check-reloc-roots.patch
* 0009-btrfs-progs-prevent-close_root-if-the-root-to-close-.patch
* 0010-btrfs-progs-fix-mkfs.btrfs-segfault-with-features-op.patch
* 0011-btrfs-progs-Enhance-the-command-btrfs-filesystem-df.patch
* 0012-btrfs-progs-Add-helpers-functions-to-handle-the-prin.patch
* 0013-btrfs-progs-Add-command-btrfs-filesystem-disk-usage.patch
* 0014-btrfs-progs-Add-btrfs-device-disk-usage-command.patch
* 0015-btrfs-progs-cleanup-dead-return-after-usage-for-fi-d.patch
* 0016-btrfs-progs-Fix-memleak-in-get_raid56_used.patch
* 0017-Btrfs-progs-fi-usage-free-memory-if-realloc-fails.patch
* 0018-btrfs-progs-read-global-reserve-size-from-space-info.patch
* 0019-btrfs-progs-add-original-df-and-rename-disk_usage-to.patch
* 0020-btrfs-progs-move-device-usage-to-cmds-device-more-cl.patch
* 0021-btrfs-progs-check-if-we-can-t-get-info-from-ioctls-d.patch
* 0022-btrfs-progs-zero-out-structures-before-calling-ioctl.patch
* 0023-btrfs-progs-print-B-for-bytes.patch
* 0024-btrfs-progs-Print-more-info-about-device-sizes.patch
* 0025-btrfs-progs-compare-unallocated-space-against-the-co.patch
* 0026-btrfs-progs-add-section-of-overall-filesystem-usage.patch
* 0027-btrfs-progs-cleanup-filesystem-device-usage-code.patch
* 0028-btrfs-progs-extend-pretty-printers-with-unit-mode.patch
* 0029-btrfs-progs-replace-df_pretty_sizes-with-pretty_size.patch
* 0030-btrfs-progs-clean-up-return-codes-and-paths.patch
* 0031-btrfs-progs-move-global-reserve-to-overall-summary.patch
- own mkinitrd directories
- add missing symbol to library (bnc#873164)
- add version dependency for devel package
- Added patches:
* 0001-btrfs-progs-move-arg_strtou64-to-a-separate-file-for.patch
- fsck: fixes and enahancements to --init-extent-tree mode
- fsck: chunk-recover updates
- scrub: add force option -f
- send: check if subvolumes are read-only
- subvol snapshot: add options to affect commit behaviour
- btrfs: add properties command group
- restore: add dry-run option
- restore: fix restoring of compressed files
- mkfs: support for no-holes feature
- mkfs: option -r deals with hardlinks and relative paths
- mkfs: discard phase is interruptible
- documentation updates
- cleaned spec file
- Removed patches:
* 0162-btrfs-progs-fix-loop-device-mount-checks.patch
* 0165-Revert-btrfs-progs-update-options-in-find-root.c.patch
* 0166-Btrfs-progs-add-some-verbose-output-to-find-root.patch
- bump version to 3.12
- update tarball and remove upstreamed patches
- fsck, image, restore: various improvements and fixes
- btrfs: quota rescan (fate#312751)
- fsck updates
- more mkfs sanity checks
- qgroup rescan wait
- Added patches:
* 0050-Btrfs-progs-commit-the-csum_root-if-we-do-init-csum-.patch
* 0051-btrfs-progs-Fix-getopt-on-arm-ppc-platforms.patch
* 0052-btrfs-progs-fix-duplicate-__-su-typedefs-on-ppc64.patch
* 0053-btrfs-progs-use-reentrant-localtime.patch
* 0054-btrfs-progs-don-t-have-to-report-ENOMEDIUM-error-dur.patch
* 0055-Btrfs-progs-added-btrfs-quota-rescan-w-switch-wait.patch
* 0056-btrfs-progs-fix-qgroup-realloc-inheritance.patch
* 0057-Btrfs-progs-fix-restore-command-leaving-corrupted-fi.patch
* 0058-btrfs-progs-avoid-write-to-the-disk-before-sure-to-c.patch
* 0059-btrfs-progs-error-if-device-for-mkfs-is-too-small.patch
* 0060-btrfs-progs-error-if-device-have-no-space-to-make-pr.patch
* 0061-btrfs-progs-calculate-available-blocks-on-device-pro.patch
* 0062-Btrfs-progs-keep-track-of-transid-failures-and-fix-t.patch
- Change udev rule filename in setup-btrfs.sh to
/usr/lib/udev/rules.d/64-btrfs.rules from
from /usr/lib/udev/rules.d/80-btrfs.rules (bnc#839960 comment#7)
- Remove udev rules file - udev packages one itself (bnc#839960).
- update to upstream master (194aa4a1)
- btrfs-restore: deal with NULL returns from read_node_slot
- btrfs-restore: use the correct leafsize when reading the FS location
- btrfs-find-root: Add options to control generation and level
- btrfsck: fix incorrect casting on items in the corrupt_blocks tree
- Btrfs-progs: fix closing of devices
- Btrfs-progs: enhance btrfs-image to restore image onto multiple disks
- Btrfs-progs: cleanup btrfs-image usage
- Btrfs-progs: delete fs_devices itself from fs_uuid list before freeing
- Btrfs-progs: skip open devices which is missing
- Btrfs-progs: fix misuse of skinny metadata in btrfs-image
- Btrfs-progs: recover raid0/raid10/raid5/raid6 metadata chunk
- Btrfs-progs: Add chunk rebuild function for RAID1/SINGLE/DUP
- Btrfs-progs: introduce list_{first, next}_entry/list_splice_tail{_init}
- Btrfs-progs: Add chunk recover function - using old chunk items
- Btrfs-progs: Add block group check funtion
- Btrfs-progs: extend the extent cache for the device extent
- Btrfs-progs: use rb-tree instead of extent cache tree for fs/file roots
- Btrfs-progs: introduce common insert/search/delete functions for rb-tree
- Btrfs-progs: cleanup similar code in open_ctree_* and close_ctree
- Btrfs-progs: Don't free the devices when close the ctree
- Btrfs-progs: don't close the file descriptor 0 when closing a device
- Btrfs-progs: fix missing recow roots when making btrfs filesystem
- Add fix for passing super_nr while opening ctree
- btrfs-progs-mkfs-default-extref.diff: turn on extended refs by
default, (aka hardlink count limtitation) (bnc#835695)
- added 0040-btrfs-progs-fix-loop-device-mount-checks.patch: fix
loop mount detection again (bnc#834173)
- Simplify checks in mkinitrd scripts.
They are always true because they come from the same package
Use relative paths to binaries
- Move udev rules to /usr.
- Adjust rules to call binary from /usr
- Simplify fsck.btrfs, its just a dummy until fixed
- update to upstream master (f00dd8386a57d241d0f7c)
- Make requirement on libattr-devel explicit
- initrd support: add module (bnc#750185, bnc#727383)
- set correct file mode if writing replacement fsck
- fix build failure
- add btrfs-debug-tree to initrd
- adjust fs size to correct size (bnc#744593)
- man page documentation updates
- do not package obsolete utilities
- mkfs: store correct size of device in superblock (bnc#730103)
- updated restriper/balance commands to match kernel version
- place binaries in /usr tree (UsrMerge project)
- adjust mkinitrd scrippt accordingly
- add btrfsck repair options for:
- rebuild extent records
- fix block group accounting
- reset csums for rescue nodatasum mount
- prune corrupt extent allocation tree blocks
- device scanning fixes for dm and multipath (bnc#749540)
- initrd support: move btrfs device scan after block device setup
- documentation updates
- add csize for file commpressed size
- updated restore utility
- patch license to follow spdx.org standard
- btrfs-progs-fix-open_ctree_usage_segfaults.patch: fix
segfaults from bnc#710486 due to unchecked usage of return
value of open_ctree()
[fixed compilation warnings]
- pull upstream, replace existing patches, spec update
- update 'restore' utility
- lzo support
- tools may now take earlies superblock when opening the fs
- other fixes
- pull integration-20111030 branch
- mkfs: force mkfs if desired
- other fixes
- add btrfs-dump-super to mkinitrd
- other fixes
- skip non-existent devices or without media
- documentation updates
- scrubbing single device
- graceful error handling when opening fs fails
- updated mkinitrd script to scan devices before mount (bnc#727383)
- add several tools to mkinitrd if root fs is btrfs
- pull upstream branch and delete local patches
- btrfsck: ignore -a (bnc#655906)
- btrfsck: fix strerror value
- Remove redundant tags/sections from specfile
- Use %_smp_mflags for parallel build
- add patch for local version override as we do not build from
git, and avoid doubled "Btrfs" in output of 'btrfs'
- reorder help for 'get-default' right after 'set-default'
- add option -p to print parent subvolume
- add subvolume 'get-default' subsubcommand
- remove debugging printf from
0001-Btrfs-progs-add-a-btrfs-select-super-command-to-over.patch
- add support for currently available kernel features:
- add scrub subcommand
- scan /proc/partitions by default (or use --all-devices for all)
- mkfs fixes and improvements
- documentation fixes
- fix failing on deleted loop mounts (bnc#697671)
- update from git:
- add btrfs-select-super utility
- add btrfs-label utility
- allow mixed data+metadata (option --mixed)
- allow populating new filesystem with files (option --rootdir)
- allow discard support in mkfs
- lzo support
- deprecate 'btrfsctl' 'btrfs-vol' 'btrfs-show'
- other bugfixes and documentation improvements
- change to a hardlink
- add link for fsck.btrfs (bnc#665899)
- update to v0.19-35-g1b444cd:
* used space accounting fix for the converter
* Add btrfs-list for listing subvolumes
* Add new util: 'btrfs'
* multidevice support for check_mounted
* check slash in deleting subvolumes
* Add btrfsck option to select the super block copy
* btrfs-debug-tree: add -d option to print only the device mapping
- fix crash on creating filesystems (bnc#603620)
- revert last change (bnc#599224#c3)
- add hardlink from fsck.btrfs (bnc#599224)
- fix memory leak (bnc#537633)
- Updated to latest repo version.
- used space accounting fix for the converter
- btrfsctl: add snapshot/subvolume destroy ioctl
- btrfsck: check root back/forward references
- Add btrfs-map-logical program to map and read logical block numbers
- build btfs-convert (bnc#572912)
- enable parallel build
- added Supplements
- move apps to /sbin
- update to 0.19:
- build with rpm optflags
- install man pages
- fix leak in extends checking (bnc#523447)
- Initial package (0.18)
==== calligra ====
- Add Set-CXX_STANDARD-to-17.patch to set language standard to
C++17, poppler 22.01.0 needs that
- Add Fix-some-more-warnings.patch to fix build failures with C++17
==== chrony ====
Subpackages: chrony-pool-openSUSE
- boo#1194206: Use /run instead of /var/run throughout.
- bsc#1194229: Fix pool package dependencies, so that SLE actually
prefers chrony-pool-suse over chrony-pool-empty.
==== cifs-utils ====
Version update (6.13 -> 6.14)
- Update cifs-utils.spec:
* Remove unused
!BuildIgnore: samba-client
BuildRequires: libwbclient-devel
- Update to cifs-utils 6.14
* smbinfo is enhanced with capability to display alternate data streams
* setcifsacl is improved to optionally reorder ACEs in preferred order
* cifs.upcall regression in kerberos mount is fixed
* remove cifs-utils-6.13.tar.bz2
* remove cifs-utils-6.13.tar.bz2.asc
* add cifs-utils-6.14.tar.bz2
* add cifs-utils-6.14.tar.bz2.asc
- Drop upstream fixed patches:
* 0001-cifs.upcall-fix-regression-in-kerberos-mount.patch
==== codec2 ====
Version update (1.0.1 -> 1.0.3)
- Update to version 1.0.3:
* Internal changes only
- Drop no longer needed patches:
* moved-freedv_callback_rx_sym-into-internal-header.patch
* codec2-no_return_random.patch
- Disable unit tests as they were not run anyways and require octave
==== cryptsetup ====
Version update (2.4.1 -> 2.4.3)
Subpackages: libcryptsetup12 libcryptsetup12-hmac
- cryptsetup 2.4.3:
* Fix possible attacks against data confidentiality through
LUKS2 online reencryption extension crash recovery
CVE-2021-4122, boo#1194469
* Add configure option --disable-luks2-reencryption to completely
disable LUKS2 reencryption code.
* Improve internal metadata validation code for reencryption
metadata
* Add updated documentation for LUKS2 On-Disk Format
Specification version 1.1.0
* Fix support for bitlk (BitLocker compatible) startup key with
new metadata entry introduced in Windows 11
* Fix space restriction for LUKS2 reencryption with data shift
- cryptsetup 2.4.2:
* Fix possible large memory allocation if LUKS2 header size is
invalid.
* Fix memory corruption in debug message printing LUKS2
checksum.
* veritysetup: remove link to the UUID library for the static
build.
* Remove link to pwquality library for integritysetup and
veritysetup. These tools do not read passphrases.
* OpenSSL3 backend: avoid remaining deprecated calls in API.
Crypto backend no longer use API deprecated in OpenSSL 3.0
* Check if kernel device-mapper create device failed in an early
phase. This happens when a concurrent creation of device-mapper
devices meets in the very early state.
* Do not set compiler optimization flag for Argon2 KDF if the
memory wipe is implemented in libc.
* Do not attempt to unload LUKS2 tokens if external tokens are
disabled. This allows building a static binary with
- -disable-external-tokens.
* LUKS convert: also check sysfs for device activity.
If udev symlink is missing, code fallbacks to sysfs scan to
prevent data corruption for the active device.
==== dhcp ====
Subpackages: dhcp-client dhcp-doc dhcp-relay dhcp-server
- Drop PrivateDevices and ProtectClock hardenings. They clash with
the chroot logic (bsc#1194722)
- Add now working CONFIG parameter to sysusers generator
==== dracut ====
Version update (055+suse.179.g3cf989c2 -> 055+suse.194.gdd41932a)
Subpackages: dracut-mkinitrd-deprecated
- Update to version 055+suse.194.gdd41932a:
* fix(network-legacy): add wicked as an alternative to arping (bsc#1193670)
* fix(network): add wicked as an alternative to arping (bsc#1193670)
- Update to version 055+suse.191.g67eb4ea8:
* fix(dracut-initramfs-restore.sh): add test for SUSE initrd name (bsc#1194570)
* fix(dracut.spec): require util-linux-systemd (bsc#1194162)
* fix(network-wicked): multiple path corrections
* fix(drm): add privacy screen modules to the initrd (bsc#1193590)
* fix(dracut.spec): update usrmerged mkinitrd dir
* fix(url-lib): improve ca-bundle detection (bsc#1175892)
==== exim ====
- disable ProtectHome=, it prevents local delivery (bsc#1194810)
==== expat ====
Version update (2.4.2 -> 2.4.3)
Subpackages: libexpat-devel libexpat1
- update to 2.4.3 (bsc#1194251, bsc#1194362, bsc#1194474,
bsc#1194476, bsc#1194477, bsc#1194478, bsc#1194479, bsc#1194480):
* CVE-2021-45960 -- Fix issues with left shifts by >=29 places
resulting in
a) realloc acting as free
b) realloc allocating too few bytes
c) undefined behavior
depending on architecture and precise value
for XML documents with >=2^27+1 prefixed attributes
on a single XML tag a la
"<r xmlns:a='[..]' a:a123='[..]' [..] />"
where XML_ParserCreateNS is used to create the parser
(which needs argument "-n" when running xmlwf).
Impact is denial of service, or more.
* CVE-2021-46143 (ZDI-CAN-16157) -- Fix integer overflow
on variable m_groupSize in function doProlog leading
to realloc acting as free.
Impact is denial of service or more.
* CVE-2022-22822 to CVE-2022-22827 -- Prevent integer overflows
near memory allocation at multiple places. Mitre assigned
a dedicated CVE for each involved internal C function:
- CVE-2022-22822 for function addBinding
- CVE-2022-22823 for function build_model
- CVE-2022-22824 for function defineAttribute
- CVE-2022-22825 for function lookup
- CVE-2022-22826 for function nextScaffoldPart
- CVE-2022-22827 for function storeAtts
Impact is denial of service or more.
==== fdk-aac-free ====
- Add baselibs.conf file since pipewire uses it and fdk-aac-free
is a dependency.
==== ffmpeg-4 ====
Subpackages: libavcodec58_134 libavdevice58_13 libavfilter7_110 libavformat58_76 libavresample4_0 libavutil56_70 libpostproc55_9 libswresample3_9 libswscale5_9
- Add ffmpeg-chromium.patch: makes packaging Chromium easier and
will allow for an easier migration for Chromium to FFmpeg 5
==== fftw3 ====
Subpackages: libfftw3-3 libfftw3_threads3
- Don't install half-baked cmake files (bsc#1194728):
the files are incomplete and useless with the build using auto-tools
==== file-roller ====
Version update (3.40.0 -> 3.40.0+51)
- Update to version 3.40.0+51:
+ Updated translations.
- Switch to git checkout via source service as upstream is not
doing releases. We want the updated translations.
- Replace p7zip-full with 7zip following packaging changes of 7zip.
==== flatpak ====
Version update (1.12.3 -> 1.12.4)
Subpackages: libflatpak0 system-user-flatpak
- Update to 1.12.4:
+ reverting non-backwards-compatible behaviour changes in the
solution previously chosen for CVE-2022-21682 (boo#1194611)
Fix will be in flatpak-builder 1.2.2.
+ Clarify documentation of --nofilesystem
+ Improve unit test coverage around --filesystem and
- -nofilesystem
+ Restore compatibility with older appstream-glib versions,
fixing a regression in 1.12.3
==== folks ====
Version update (0.15.3 -> 0.15.4)
Subpackages: folks-data libfolks-eds26 libfolks26
- Update to version 0.15.4:
+ Bugs fixed:
- Fix docs build against newer eds version.
- Fix build against newer eds version.
- Remove volatile keyword from tests.
==== glusterfs ====
Subpackages: libgfapi0 libgfrpc0 libgfxdr0 libglusterfs0
- add python-rpm-macros as dependency, fix build on on Leap 15.x
==== gnome-photos ====
Subpackages: gnome-shell-search-provider-gnome-photos
- Add gnome-photos-fix-vert-align.patch: Fix vertical alignment.
(glgo#GNOME/gnome-photos!172).
- Add upstream bug fix patches from the stable branch:
+ 5cafad57982fbef0d02b7ecb0b1a2c9f221de391.patch:
indexing-notification: Remove unused variable.
+ 1d22aac8fd7433cd1319fb2ffea0a1e294609f64.patch:
indexing-notification: Handle TrackerMiner proxy being NULL on
start-up.
- Update our Supplements to current standard.
==== gnutls ====
Version update (3.7.2 -> 3.7.3)
Subpackages: libgnutls-dane0 libgnutls30 libgnutls30-hmac
- Update to 3.7.3: [bsc#1190698, bsc#1190796]
* libgnutls: The allowlisting configuration mode has been added
to the system-wide settings. In this mode, all the algorithms
are initially marked as insecure or disabled, while the
applications can re-enable them either through the [overrides]
section of the configuration file or the new API (#1172).
* The build infrastructure no longer depends on GNU AutoGen for
generating command-line option handling, template file parsing
in certtool, and documentation generation (#773, #774). This
change also removes run-time or bundled dependency on the
libopts library, and requires Python 3.6 or later to regenerate
the distribution tarball. Note that this brings in known backward
incompatibility in command-line tools, such as long options are
now case sensitive, while previously they were treated in a case
insensitive manner: for example --RSA is no longer a valid option
of certtool. The existing scripts using GnuTLS tools may need
adjustment for this change.
* libgnutls: The tpm2-tss-engine compatible private blobs can be loaded
and used as a gnutls_privkey_t (#594). The code was originally written
for the OpenConnect VPN project by David Woodhouse. To generate such
blobs, use the tpm2tss-genkey tool from tpm2-tss-engine:
https://github.com/tpm2-software/tpm2-tss-engine/#rsa-operations
or the tpm2_encodeobject tool from unreleased tpm2-tools.
* libgnutls: The library now transparently enables Linux KTLS (kernel
TLS) when the feature is compiled in with --enable-ktls configuration
option (#1113). If the KTLS initialization fails it automatically falls
back to the user space implementation.
* certtool: The certtool command can now read the Certificate Transparency
(RFC 6962) SCT extension (#232). New API functions are also provided to
access and manipulate the extension values.
* certtool: The certtool command can now generate, manipulate, and evaluate
x25519 and x448 public keys, private keys, and certificates.
* libgnutls: Disabling a hashing algorithm through "insecure-hash"
configuration directive now also disables TLS ciphersuites that use it
as a PRF algorithm.
* libgnutls: PKCS#12 files are now created with modern algorithms by default
(!1499). Previously certtool used PKCS12-3DES-SHA1 for key derivation and
HMAC-SHA1 as an integity measure in PKCS#12. Now it uses AES-128-CBC with
PBKDF2 and SHA-256 for both key derivation and MAC algorithms, and the
default PBKDF2 iteration count has been increased to 600000.
* libgnutls: PKCS#12 keys derived using GOST algorithm now uses
HMAC_GOSTR3411_2012_512 instead of HMAC_GOSTR3411_2012_256 for integrity,
to conform with the latest TC-26 requirements (#1225).
* libgnutls: The library now provides a means to report the status
of approved cryptographic operations (!1465). To adhere to the
FIPS140-3 IG 2.4.C., this complements the existing mechanism to
prohibit the use of unapproved algorithms by making the library
unusable state.
* gnutls-cli: The gnutls-cli command now provides a --list-config
option to print the library configuration (!1508).
* libgnutls: Fixed possible race condition in
gnutls_x509_trust_list_verify_crt2 when a single trust list object
is shared among multiple threads (#1277). [GNUTLS-SA-2022-01-17,
CVSS: low]
* API and ABI modifications:
GNUTLS_PRIVKEY_FLAG_RSA_PSS_FIXED_SALT_LENGTH: new flag in
gnutls_privkey_flags_t
GNUTLS_VERIFY_RSA_PSS_FIXED_SALT_LENGTH: new flag in
gnutls_certificate_verify_flags
gnutls_ecc_curve_set_enabled: Added.
gnutls_sign_set_secure: Added.
gnutls_sign_set_secure_for_certs: Added.
gnutls_digest_set_secure: Added.
gnutls_protocol_set_enabled: Added.
gnutls_fips140_context_init: New function
gnutls_fips140_context_deinit: New function
gnutls_fips140_push_context: New function
gnutls_fips140_pop_context: New function
gnutls_fips140_get_operation_state: New function
gnutls_fips140_operation_state_t: New enum
gnutls_transport_is_ktls_enabled: New function
gnutls_get_library_configuration: New function
* Remove patches fixed in the update:
- gnutls-FIPS-module-version.patch
- gnutls-FIPS-service-indicator.patch
- gnutls-FIPS-service-indicator-public-key.patch
- gnutls-FIPS-service-indicator-symmetric-key.patch
- gnutls-FIPS-RSA-PSS-flags.patch
- gnutls-FIPS-RSA-mod-sizes.patch
- FIPS: Fix regression tests in fips and non-fips mode [bsc#1194468]
* Remove patches:
- gnutls-temporarily_disable_broken_guile_reauth_test.patch
- disable-psk-file-test.patch
- FIPS: Provide module identifier and version [bsc#1190796]
* Add configurable options to output the module name/identifier
(--with-fips140-module-name) and the module version
(--with-fips140-module-version).
* Add the CLI option list-config that reports the configuration
of the library.
* Add gnutls-FIPS-module-version.patch
- FIPS: Provide a service-level indicator [bsc#1190698]
* Add support for a "service indicator" as required in
the FIPS140-3 Implementation Guidance in section 2.4.C
* Add patches:
- gnutls-FIPS-service-indicator.patch
- gnutls-FIPS-service-indicator-public-key.patch
- gnutls-FIPS-service-indicator-symmetric-key.patch
- gnutls-FIPS-RSA-PSS-flags.patch
- FIPS: RSA KeyGen/SigGen fail with 4096 bit key sizes [bsc#1192008]
* fips: allow more RSA modulus sizes
* Add gnutls-FIPS-RSA-mod-sizes.patch
* Delete gnutls-3.6.7-fips-rsa-4096.patch
==== gstreamer-editing-services ====
Subpackages: libges-1_0-0 typelib-1_0-GES-1_0
- Fix parameters passed to meson: gtk_doc should be doc. Meson 0.60
became strict and no longer accepts invalid parameters.
- Drop hotdoc BuildRequires: as we pass -Ddoc=disabled to meson,
this dependency is not needed.
==== gstreamer-plugins-bad ====
Subpackages: gstreamer-transcoder libgstadaptivedemux-1_0-0 libgstbadaudio-1_0-0 libgstbasecamerabinsrc-1_0-0 libgstcodecparsers-1_0-0 libgstcodecs-1_0-0 libgstisoff-1_0-0 libgstmpegts-1_0-0 libgstphotography-1_0-0 libgstplayer-1_0-0 libgstsctp-1_0-0 libgsttranscoder-1_0-0 libgsturidownloader-1_0-0 libgstvulkan-1_0-0 libgstwayland-1_0-0 libgstwebrtc-1_0-0 typelib-1_0-GstTranscoder-1_0
- Drop conditionals for fdk_aac, explicitly add fdk-aac-free-devel
BuildRequires, and build it for the main package.
==== gstreamer-plugins-rs ====
- Add a BuildRequires: pkgconfig(libwebp) to fix loading
libgstrswebp.so which was failing with an `undefined symbol:
WebPAnimDecoderDelete` error.
==== gvfs ====
Subpackages: gvfs-backend-afc gvfs-backend-samba gvfs-backends gvfs-fuse
- Modernize and fix our Supplements.
- Package org.gtk.vfs.file-operations.rules polkit rules file as an
example in docs, previously it was just nuked.
==== inkscape ====
Subpackages: inkscape-extensions-extra inkscape-extensions-gimp
- Fixed export to DXF14 (boo#1189514).
Added missing dxf14_*.txt files.
- Removed redundant excludes
==== iso-codes ====
Version update (4.8.0 -> 4.9.0)
Subpackages: iso-codes-lang
- update to 4.9.0:
* ISO 639-3: New translation for Friulian
* ISO 639-5: New translations for Esperanto, Hindi, Russian
* ISO 4217: New translation for Esperanto
* Translation updates for ISO 3166-1
* Translation updates for ISO 3166-2
* Translation updates for ISO 639-2
* Translation updates for ISO 639-3
* Translation updates for ISO 639-5
==== kbd ====
Subpackages: kbd-legacy
- Add patch to fix random doubling of font sizes (bsc#1194698):
* 0001-libkfont-Initialize-kfont_context-options.patch
==== kconfigwidgets ====
- Add patch to fix deprecation-induced ABI mismatch (kde#448680):
* 0001-Use-BUILD-deprecation-wrapper-for-virtual-method.patch
==== kdump ====
Version update (0.9.2 -> 1.0)
- kdump-calibrate-Ignore-malformed-VMCOREINFO.patch: calibrate:
Ignore malformed VMCOREINFO lines (address occasional OBS build
failures).
- Update to 1.0
* Estimate kdump memory requirements at build time
(jsc#SLE-18441).
- Remove patches that have been upstreamed:
* kdump-0.9.2-mkdumprd-properly-pass-compression-params.patch
==== kernel-firmware ====
Version update (20211123 -> 20220119)
Subpackages: kernel-firmware-all kernel-firmware-amdgpu kernel-firmware-ath10k kernel-firmware-ath11k kernel-firmware-atheros kernel-firmware-bluetooth kernel-firmware-bnx2 kernel-firmware-brcm kernel-firmware-chelsio kernel-firmware-dpaa2 kernel-firmware-i915 kernel-firmware-intel kernel-firmware-iwlwifi kernel-firmware-liquidio kernel-firmware-marvell kernel-firmware-media kernel-firmware-mediatek kernel-firmware-mellanox kernel-firmware-mwifiex kernel-firmware-network kernel-firmware-nfp kernel-firmware-nvidia kernel-firmware-platform kernel-firmware-prestera kernel-firmware-qcom kernel-firmware-qlogic kernel-firmware-radeon kernel-firmware-realtek kernel-firmware-serial kernel-firmware-sound kernel-firmware-ti kernel-firmware-ueagle kernel-firmware-usb-network
- Update to version 20220119 (git commit 0c6a7b3bf728):
* linux-firmware: Update firmware file for Intel Bluetooth 9260
* linux-firmware: Update firmware file for Intel Bluetooth 9462
* linux-firmware: Update firmware file for Intel Bluetooth 9462
* linux-firmware: Update firmware file for Intel Bluetooth 9560
* linux-firmware: Update firmware file for Intel Bluetooth 9560
* linux-firmware: Update firmware file for Intel Bluetooth AX201
* linux-firmware: Update firmware file for Intel Bluetooth AX201
* linux-firmware: Update firmware file for Intel Bluetooth AX211
* linux-firmware: Update firmware file for Intel Bluetooth AX211
* linux-firmware: Update firmware file for Intel Bluetooth AX210
* linux-firmware: Update firmware file for Intel Bluetooth 9560
* linux-firmware: Update firmware file for Intel Bluetooth AX200
* linux-firmware: Update firmware file for Intel Bluetooth AX201
* linux-firmware: update firmware for mediatek bluetooth chip(MT7921)
* linux-firmware: update firmware for MT7921 WiFi device
* Mellanox: Add new mlxsw_spectrum firmware xx.2010.1232
* linux-firmware: add marvell CPT firmware images
* QCA: Add Bluetooth nvm file for WCN685x
* QCA: Update Bluetooth WCN685x 2.1 firmware to 2.1.0-00324
* QCA: Update Bluetooth WCN685x 2.0 firmware to 2.0.0-00609
* i915: Add GuC v69.0.3 for all platforms
- Add entry for rvu_cptpf
- Update to version 20220111 (git commit 13dca280f760):
* linux-firmware: update firmware for MT7915
* iwlwifi: add new FWs from core63-136 release
* iwlwifi: add new FWs from core66-88 release
* iwlwifi: update 9000-family firmwares to core66-88
* linux-firmware: add firmware for MT7916
* linux-firmware: Update firmware file for Intel Bluetooth 9462
* linux-firmware: Update firmware file for Intel Bluetooth 9462
* linux-firmware: Update firmware file for Intel Bluetooth 9560
* linux-firmware: Update firmware file for Intel Bluetooth 9560
* linux-firmware: Update firmware file for Intel Bluetooth AX201
* linux-firmware: Update firmware file for Intel Bluetooth AX201
* linux-firmware: Update firmware file for Intel Bluetooth AX211
* linux-firmware: Update firmware file for Intel Bluetooth AX211
* linux-firmware: Update firmware file for Intel Bluetooth AX210
* WHENCE: add missing symlink for NanoPi R1
* amdgpu: update yellow carp dmcub firmware
* cxgb4: Update firmware to revision 1.26.6.0
- update aliases from 5.16 final
- Update to version 20211229 (git commit 57d6b9507e28):
* cnm: add chips&media wave521c firmware.
* linux-firmware: update firmware for MT7921 WiFi device
* linux-firmware: update firmware for mediatek bluetooth chip (MT7921)
* rtw88: 8822c: Update normal firmware to v9.9.11
* QCA: Update Bluetooth WCN685x firmware to 2.1.0-00298
* amdgpu: update green sardine PSP firmware
* bnx2x: Add FW 7.13.21.0
* linux-firmware: update frimware for mediatek bluetooth chip (MT7921)
* linux-firmware: wilc1000: update WILC1000 firmware to v15.4.1
* rtl_bt: Update RTL8761B BT UART firmware to 0x0CA9_8A6B
* rtl_bt: Update RTL8761B BT USB firmware to 0x09A9_8A6B
* cxgb4: Update firmware to revision 1.26.4.0
* rtw89: 8852a: update fw to v0.13.33.0
* i915: Add DMC firmware v2.14 for ADL-P
* QCA: Add Bluetooth default nvm file for WCN685x
==== kernel-source ====
Version update (5.16.0 -> 5.16.1)
Subpackages: kernel-default kernel-docs
- Linux 5.16.1 (bsc#1012628).
- workqueue: Fix unbind_workers() VS wq_worker_running() race
(bsc#1012628).
- workqueue: Fix unbind_workers() VS wq_worker_sleeping() race
(bsc#1012628).
- staging: r8188eu: switch the led off during deinit
(bsc#1012628).
- bpf: Fix out of bounds access from invalid *_or_null type
verification (bsc#1012628).
- Bluetooth: btusb: Add one more Bluetooth part for the Realtek
RTL8852AE (bsc#1012628).
- Bluetooth: btusb: Fix application of sizeof to pointer
(bsc#1012628).
- Bluetooth: btusb: fix memory leak in
btusb_mtk_submit_wmt_recv_urb() (bsc#1012628).
- Bluetooth: btusb: enable Mediatek to support AOSP extension
(bsc#1012628).
- Bluetooth: btusb: Add the new support IDs for WCN6855
(bsc#1012628).
- Bluetooth: btusb: Add one more Bluetooth part for WCN6855
(bsc#1012628).
- Bluetooth: btusb: Add two more Bluetooth parts for WCN6855
(bsc#1012628).
- Bluetooth: btusb: Add support for Foxconn MT7922A (bsc#1012628).
- Bluetooth: btintel: Fix broken LED quirk for legacy ROM devices
(bsc#1012628).
- Bluetooth: btusb: Add support for Foxconn QCA 0xe0d0
(bsc#1012628).
- Bluetooth: bfusb: fix division by zero in send path
(bsc#1012628).
- ARM: dts: exynos: Fix BCM4330 Bluetooth reset polarity in I9100
(bsc#1012628).
- USB: core: Fix bug in resuming hub's handling of wakeup requests
(bsc#1012628).
- USB: Fix "slab-out-of-bounds Write" bug in
usb_hcd_poll_rh_status (bsc#1012628).
- ath11k: Fix buffer overflow when scanning with extraie
(bsc#1012628).
- mmc: sdhci-pci: Add PCI ID for Intel ADL (bsc#1012628).
- Bluetooth: add quirk disabling LE Read Transmit Power
(bsc#1012628).
- Bluetooth: btbcm: disable read tx power for some Macs with
the T2 Security chip (bsc#1012628).
- Bluetooth: btbcm: disable read tx power for MacBook Air 8,1
and 8,2 (bsc#1012628).
- veth: Do not record rx queue hint in veth_xmit (bsc#1012628).
- mfd: intel-lpss: Fix too early PM enablement in the ACPI
- >probe() (bsc#1012628).
- mfd: intel-lpss-pci: Fix clock speed for 38a8 UART
(bsc#1012628).
- can: gs_usb: fix use of uninitialized variable, detach device
on reception of invalid USB data (bsc#1012628).
- can: isotp: convert struct tpcon::{idx,len} to unsigned int
(bsc#1012628).
- can: gs_usb: gs_can_start_xmit(): zero-initialize
hf->{flags,reserved} (bsc#1012628).
- random: fix data race on crng_node_pool (bsc#1012628).
- random: fix data race on crng init time (bsc#1012628).
- platform/x86/intel: hid: add quirk to support Surface Go 3
(bsc#1012628).
- drm/i915: Avoid bitwise vs logical OR warning in
snb_wm_latency_quirk() (bsc#1012628).
- staging: greybus: fix stack size warning with UBSAN
(bsc#1012628).
- parisc: Fix pdc_toc_pim_11 and pdc_toc_pim_20 definitions
(bsc#1012628).
Disabled:
patches.suse/Bluetooth-Apply-initial-command-workaround-for-more-.patch
as it conflicts with 95655456e7ce. Asked in bsc#1193124.
- commit 13f032a
- Update patches.suse/vfs-add-super_operations-get_inode_dev
Copy an updated version from SLE15-SP4 with one minor refresh.
- commit c02e2ab
- Refresh
patches.suse/0001-usb-Add-Xen-pvUSB-protocol-description.patch.
- Refresh
patches.suse/0002-usb-Introduce-Xen-pvUSB-frontend-xen-hcd.patch.
- commit 8950040
- update patches metadata
- update upstream references
- patches.suse/media-Revert-media-uvcvideo-Set-unique-vdev-name-bas.patch
- patches.suse/mwifiex-Fix-skb_over_panic-in-mwifiex_usb_recv.patch
- patches.suse/random-fix-crash-on-multiple-early-calls-to-add_bootloader_randomness.patch
- commit 949bbaa
==== ldb ====
Subpackages: libldb2 python3-ldb
- Modify packaging to allow parallel installation with libldb1
(bsc#1192684):
+ Private libraries are installed in %{_libdir}/ldb2/
+ Modules are installed in %{_libdir}/ldb2/modules
==== libapparmor ====
- add update-samba-abstractions-ldb2.diff: Cater for changes to ldb
packaging to allow parallel installation with libldb;
(bsc#1192684).
==== libblockdev ====
Subpackages: libbd_btrfs2 libbd_crypto2 libbd_fs2 libbd_loop2 libbd_lvm2 libbd_mdraid2 libbd_part2 libbd_swap2 libbd_utils2 libblockdev2
- Remove unnecessary dependency of libbd_part2 on multipath-tools
(bsc#1194771)
==== libchamplain ====
Subpackages: libchamplain-0_12-0 typelib-1_0-Champlain-0_12
- Add 91a9e41fed6269637da52d5f88699782a940b198.patch: g-i: Annotate
champlain_layer_set_view to allow NULL as view.
==== libcontainers-common ====
- Switch registries.conf to v2 format
==== libfido2 ====
- Use BuildRequires: openssl-devel instead of forcing 1.1 since 3.x
is now supported.
==== libglvnd ====
- Re-enable asm on aarch64
- Add patch to fix run with BTI enabled on aarch64:
* libglvnd-add-bti.patch - boo#1188928
==== libjansson ====
Version update (2.13.1 -> 2.14)
- Update to 2.14:
* New Features:
+ Add `json_object_getn`, `json_object_setn`, `json_object_deln`, and the
corresponding `nocheck` functions.
* Fixes:
+ Handle `sprintf` corner cases.
* Build:
+ Symbol versioning for all exported symbols (gh#akheron/jansson#523).
+ Fix compiler warnings.
* Documentation:
+ Small fixes.
+ Sphinx 3 compatibility (gh#akheron/jansson#530).
- Use GitHub as source URLs: Release hasn't been uploaded to digip.org.
- Cleanup with spec-cleaner.
- Add check section.
==== libndp ====
Version update (1.7 -> 1.8)
- update to 1.8:
* libndp,ndptool: use poll() instead of select()
* ndptool: avoid static buffer for string in ndptool
* libndp: avoid static buffer for debug string in ndp_sock_recv()
* libndp: use thread local variables for static return arguments
* ndptool: fix printing dnssl lifetime in ndptool
* ndptool: fix potential memory leak caused by strdup
* libndp: close sockfd after using to avoid handle leak
==== libnettle ====
Subpackages: libhogweed6 libnettle8
- Provide s390x CPACF/SHA/AES Support for Crypto Libraries
* Add libnettle-s390x-CPACF-SHA-AES-support.patch [jsc#SLE-20733]
==== libnma ====
Version update (1.8.32 -> 1.8.34)
Subpackages: libnma0 typelib-1_0-NMA-1_0
- Update to version 1.8.34:
+ Add possibility of building libnma-gtk4 library with
experimental Gtk4 support.
- Add pkgconfig(gtk4) BuildRequires and pass libnma_gtk4=true to
meson, build the experimental Gtk4 support.
- Following the above, package new sub-packages libnma-gtk4-0 and
typelib-1_0-NMA4-1_0 and libnma-gtk4-devel.
- Use ldconfig_scriptlets for post(un) handling.
- Split out documentation files in own docs sub-package.
==== libpwquality ====
Subpackages: libpwquality1 pam_pwquality
- Add python-rpm-macros to BuildRequires (boo#1194757).
==== librdkafka ====
Version update (1.8.0 -> 1.8.2)
- update to 1.8.2:
* Added ssl.ca.pem to add CA certificate by PEM string
* Upon quick repeated leader changes the transactional producer could receive
an OUT_OF_ORDER_SEQUENCE error from the broker
* The transactional producer could stall during a transaction if the transaction
coordinator changed
==== libreoffice ====
Subpackages: libreoffice-base libreoffice-calc libreoffice-draw libreoffice-filters-optional libreoffice-gnome libreoffice-gtk3 libreoffice-icon-themes libreoffice-impress libreoffice-l10n-en libreoffice-mailmerge libreoffice-math libreoffice-pyuno libreoffice-qt5 libreoffice-writer libreofficekit
- Fix bsc#1183308: LO-L3: Simple, seven page slide deck of 3.7MB takes
looong to open, start presentation mode, or move back to slide 1
* bsc1183308.patch
==== libsmi ====
Subpackages: libsmi2
- spec file cleanup
==== libspf2 ====
Version update (1.2.10 -> 1.2.11)
- update to 1.2.11 - no changelog available, bugfixes
- Drop 0001-spf_compile.c-Correct-size-of-ds_avail.patch
- Remove comment change from libspf2-1.2.10-libreplace.patch
==== libvirt ====
Version update (7.10.0 -> 8.0.0)
Subpackages: libvirt-client libvirt-daemon libvirt-daemon-driver-interface libvirt-daemon-driver-lxc libvirt-daemon-driver-network libvirt-daemon-driver-nodedev libvirt-daemon-driver-nwfilter libvirt-daemon-driver-qemu libvirt-daemon-driver-secret libvirt-daemon-driver-storage libvirt-daemon-driver-storage-core libvirt-daemon-driver-storage-disk libvirt-daemon-driver-storage-iscsi libvirt-daemon-driver-storage-iscsi-direct libvirt-daemon-driver-storage-logical libvirt-daemon-driver-storage-mpath libvirt-daemon-driver-storage-rbd libvirt-daemon-driver-storage-scsi libvirt-daemon-lxc libvirt-daemon-qemu libvirt-libs
- sysconfig files have not been distributed for many months. Add
upstream patches that improve documentation and moves service
default settings to the associated systemd service file.
3be5ba11-libvirt-guests-install.patch,
16172741-libvirt-guests-manpage.patch,
8eb44616-remove-sysconfig-files.patch
- Update to libvirt 8.0.0
- CVE-2021-4147
- bsc#1191511
- jsc#SLE-11435, jsc#SLE-18354
- Many incremental improvements and bug fixes, see
https://libvirt.org/news.html#v8-0-0-2022-01-14
- Dropped patches:
23b51d7b-libxl-disable-death-event.patch,
a4e6fba0-libxl-rename-threadinfo-struct.patch,
e4f7589a-libxl-shutdown-thread-name.patch,
b9a5faea-libxl-handle-death-thread.patch,
5c5df531-libxl-search-domid-in-thread.patch,
a7a03324-libxl-protect-logger-access.patch,
cbae4eaa-libxl-add-domainGetMessages.patch
==== ncurses ====
Version update (6.3.20220101 -> 6.3.20220115)
Subpackages: libncurses6 ncurses-utils terminfo terminfo-base terminfo-iterm terminfo-screen
- Fix boo#1194805 by skipping linker optimizations from final
pkgconfig files as well as ncurses-config
- Add ncurses patch 20220115
+ improve checks for valid mouse events when an intermediate mouse
state is not part of the mousemask specified by the caller (report by
Anton Vidovic, cf: 20111022).
+ use newer version 1.36 of gnathtml for generating Ada html files.
==== nvme-cli ====
Version update (1.16 -> 2.0~0)
Subpackages: nvme-cli-bash-completion
- Fix zsh completion package depenedencies.
- Use osc_scm to manage upstream input source.
- Fix version string.
- Update Source URL and introduce a variable for the release canditate
version string.
- Update to v2.0-rc0
* Depends on libnvme
* rename harden_nvmf-connect@.service.patch to 0100-harden_nvmf-connect@.service.patch
* drop 0102-nvme-cli-Add-script-to-determine-host-NQN.patch
==== openSUSE-build-key ====
- refresh the openSUSE Backports key (bsc#1193092)
- gpg-pubkey-65176565-59787af5.asc
+ gpg-pubkey-65176565-61a0ee8f.asc
- removed old security key
- updated security key to 2020 version
==== perl-JSON ====
Version update (4.04 -> 4.05)
- updated to 4.05
see /usr/share/doc/packages/perl-JSON/Changes
4.05 2022-01-14
- removed VERSION section in pod (GH#52, abraxxa++)
==== perl-MRO-Compat ====
Version update (0.13 -> 0.15)
- updated to 0.15
see /usr/share/doc/packages/perl-MRO-Compat/Changes
0.15 - 2022-01-06
- fix function prototypes to match core functions
0.14_01 - 2020-11-16
- optimize pure perl DFS inheritance calculation on perl 5.8
- pod formatting fix
==== perl-Net-SSLeay ====
Version update (1.90 -> 1.92)
- updated to 1.92
see /usr/share/doc/packages/perl-Net-SSLeay/Changes
1.92 2022-01-12
- New stable release incorporating all changes from developer releases 1.91_01
to 1.91_03.
- Summary of major changes since version 1.90:
- Net::SSLeay now supports stable releases of OpenSSL 3.0.
- OpenSSL 3.0.0 introduces the concept of "providers", which contain
cryptographic algorithm implementations. Many outdated, deprecated and/or
insecure algorithms have been moved to the "legacy" provider, which may
need to be loaded explicitly in order to use them with Net::SSLeay. See
"Low level API: OSSL_LIB_CTX and OSSL_PROVIDER related functions" in the
Net::SSLeay module documentation for details.
- Net::SSLeay's built-in PEM_get_string_PrivateKey() function depends on
algorithms that have moved to the legacy provider described above; if
OpenSSL has been compiled without the legacy provider, the tests
t/local/33_x509_create_cert.t and t/local/63_ec_key_generate_key.t will
fail when the test suite is run.
- TLS 1.1 and below may only be used at security level 0 as of OpenSSL
3.0.0; if a minimum required security level is imposed (e.g. in an
OpenSSL configuration file managed by the operating system), the tests
t/local/44_sess.t and t/local/45_exporter.t will fail when the test suite
is run.
- Net::SSLeay now supports stable releases of LibreSSL from the 3.2 - 3.4
series (with the exception of 3.2.2 and 3.2.3 - see "COMPATIBILITY" in the
Net::SSLeay module documentation for details).
- The TLS 1.3 implementation in LibreSSL 3.1 - 3.3, parts of which are
enabled by default, is not fully compatible with the libssl API and may
not function as expected with Net::SSLeay; see "KNOWN BUGS AND CAVEATS"
in the Net::SSLeay module documentation for details.
- A number of new libcrypto/libssl constants and functions are now exposed,
including SSL_CTX_set_keylog_callback() and SSL_CTX_set_msg_callback(),
which are helpful when debugging TLS handshakes. See the release notes for
the 1.91 developer releases below for a full list of newly-exposed
constants and functions.
1.91_03 2022-01-10
- Avoid misclassifying Clang as GCC in Test::Net::SSLeay's can_thread()
function. This fixes test failures in 61_threads-cb-crash.t and
62_threads-ctx_new-deadlock.t on OpenBSD and FreeBSD (and possibly other OSes
too). Fixes GH-350.
- Add the following constants for OpenSSL_version():
- OPENSSL_CPU_INFO
- OPENSSL_FULL_VERSION_STRING
- OPENSSL_MODULES_DIR
- OPENSSL_VERSION_STRING
These constants are new in OpenSSL 3.0.0 release.
- Update test 03_use.t to print information returned by the new constants.
- Add more information to 03_use.t print output, including printing
OPENSSL_VERSION_NUMBER as a 32bit hex number.
- Add the following constants for OPENSSL_info() added in OpenSSL 3.0.0.
- OPENSSL_INFO_CONFIG_DIR
- OPENSSL_INFO_CPU_SETTINGS
- OPENSSL_INFO_DIR_FILENAME_SEPARATOR
- OPENSSL_INFO_DSO_EXTENSION
- OPENSSL_INFO_ENGINES_DIR
- OPENSSL_INFO_LIST_SEPARATOR
- OPENSSL_INFO_MODULES_DIR
- OPENSSL_INFO_SEED_SOURCE
- Expose OPENSSL_info(), OPENSSL_version_major(),
OPENSSL_version_minor(), OPENSSL_version_patch(),
OPENSSL_version_pre_release() and
OPENSSL_version_build_metadata() added in OpenSSL
3.0.0. Update 03_use.t diagnostics and 04_basic.t tests to
use these functions.
- Clarify documentation of OpenSSL_version_num(), SSLeay(),
SSLeay_version() and OpenSSL_version().
- Add notes to OpenSSL_version_num() and SSLeay() on how to
determine if the library is OpenSSL or LibreSSL and how to
interpret the version number these functions return.
- Add constants OPENSSL_VERSION_MAJOR, OPENSSL_VERSION_MINOR
and OPENSSL_VERSION_PATCH. Update
OPENSSL_version_major/minor/patch documentation to describe
how these library functions relate to Net-SSLeay compile
time constants. Add tests to verify the constants and
functions return equal values.
1.91_02 2021-12-29
- On OpenVMS, detect vendor SSL111 product based on OpenSSL 1.1.x.
- Cast the return value of OCSP_SINGLERESP_get0_id to fix a
const/non-const mismatch warning that broke the build on OpenVMS.
- Create SSL_CTXs with Test::Net::SSLeay's new_ctx() function for tests that
are broken with LibreSSL 3.2. Partially fixes GH-232.
- In 36_verify.t, account for the presence of the X509_V_FLAG_LEGACY_VERIFY
flag (signalling the use of the legacy X.509 verifier) in LibreSSL 3.2
versions from 3.2.4 onwards. Fixes the remainder of GH-232.
- Note in the Net::SSLeay documentation that the TLS 1.3 implementation in
LibreSSL 3.1 - 3.3, parts of which are enabled by default, is not
libssl-compatible. See the "KNOWN BUGS AND CAVEATS" section of
lib/Net/SSLeay.pod for details.
- Add constants for, but not limited to,
SSL_CTX_set_msg_callback and SSL_set_msg_callback functions:
SSL3_RT_* for record content types, SSL3_MT_* for Handshake
and ChangeCipherSpec message types, SSL2_VERSION to
complement the list of existing SSL and TLS version
constants and SSL2_MT_* for SSLv2 Handshake messages.
- Expose SSL_CTX_set_keylog_callback and
SSL_CTX_get_keylog_callback available with OpenSSL 1.1.1pre1
and later.
- Enhance 10_rand.t RAND_file_name tests: tests are no longer
affected by the runtime environment variables, HOME and
RANDFILE. These variables are insted controlled by the tests
with local %ENV. Problems related to RAND_file_name were
discussed in Github issue GH-152, and there might still be
cases when, for example, setuid is used because of OpenSSL's
use of glibc secure_getenv() and related functions. Address
RAND_file_name differences between OpenSSL versions. Note in
SSLeay.pod that RAND_file_name() can return undef with
LibreSSL and recent OpenSSL versions.
- Removed the following exportable symbols from SSLeay.pm:
- SESSION, clear_error and err have never been defined.
- add_session, flush_sessions and remove_session were
removed in Net::SSLeay 1.04
- Undocumented X509_STORE_CTX_set_flags() was removed in
Net::SSLeay 1.37 when X509_VERIFY_PARAM_* functions were
added. These are preferred over directly setting the flags.
- Clarified Changes entry for release 1.75 to state that
CTX_v2_new is not removed from Net::SSLeay. SSLv2 is
completely removed in OpenSSL 1.1.0.
- Beginning with OpenSSL 3.0.0-alpha17, SSL_CTX_get_options()
and related functions return uint64_t instead of long. For
this reason constant() in constant.c and Net::SSLeay must
also be able to return 64bit constants. Add uint64_t
definitions to typemap file and update constant() and
options functions to use uint64_t with OpenSSL 3.0.0 and
later when Perl is compiled with 64bit integers. With 32bit
integers, the functions remain as they are: constant()
functions return double and options functions return
long. This partially fixes GH-315, 32bit integer Perls need
to be handled separately.
- Work around macOS Monterey build failure during 'perl
Makefile.PL' that causes perl to exit with 'WARNING:
.../perl is loading libcrypto in an unsafe way' or similar
message. This fixes GH-329. Thanks to Daniel J. Luke for the
report and John Napiorkowski for additional help.
1.91_01 2021-10-24
- Correct X509_STORE_CTX_init() return value to integer. Previous
versions of Net::SSLeay return nothing.
- Update tests to call close() to avoid problems seen with
test 44_sess.t, and possibly other tests, running on older
Windows Perl versions. Also add some missing calls in tests
to shutdown and free ssl structures.
- Fix multiple formatting errors in the documentation for Net::SSLeay.
Thanks to John Jetmore.
- Check for presence of libssl headers in Makefile.PL, and exit with an
error instead of generating an invalid Makefile if they cannot be found.
Fixes RT#105189. Thanks to James E Keenan for the report.
- Added support for SSL_CTX_set_msg_callback/SSL_set_msg_callback
Thanks to Tim Aerts.
- Adjust time in ASN1_TIME_timet based on current offset to GMT to
address GH-148. Thanks to Steffen Ullrich.
- Multiple updates to tests to match OpenSSL 3.0 behaviour.
Thanks to Michal Josef ?pa?ek.
- OpenSSL 3.0 related changes in tests include:
- TLSv1 and TLSv1.1 require security level 0 starting with 3.0 alpha 5.
- SSL_CTX_set_ciphersuites() and SSL_set_ciphersuites() ignore
unknown ciphersuites starting with 3.0 alpha 11.
- Error code and error string packing and formatting changes.
- PEM_get_string_PrivateKey default algorithm requires legacy provider.
- See OpenSSL manual page migration_guide(7) for more information about
changes in OpenSSL 3.0.
- Automatically detect OpenSSL installed via Homebrew on ARM-based macOS
systems. Thanks to Graham Knop for the patch.
- Account for the divergence in TLSv1.3 ciphersuite names between OpenSSL and
LibreSSL, which was causing failures of some TLSv1.3 tests with LibreSSL.
- In 36_verify.t, account for the presence of the X509_V_FLAG_LEGACY_VERIFY
flag (signalling the use of the legacy X.509 verifier) in LibreSSL 3.3.2 and
above.
- In 43_misc_functions.t, account for the fact that LibreSSL 3.2.0 and above
implement TLSv1.3 without exposing a TLS1_3_VERSION constant.
- Expose OpenSSL 3.0 functions
OSSL_LIB_CTX_get0_global_default, OSSL_PROVIDER_load,
OSSL_PROVIDER_try_load, OSSL_PROVIDER_unload,
OSSL_PROVIDER_available, OSSL_PROVIDER_do_all
OSSL_PROVIDER_get0_name and OSSL_PROVIDER_self_test.
Add test files 22_provider.t, 22_provider_try_load.t and
22_provider_try_load_zero_retain.t.
- With OpenSSL 3.0 and later, the legacy provider is loaded in
33_x509_create_cert.t to allow PEM_get_string_PrivateKey to
continue working until its default encryption method is
updated. Fixes GH-272 and closes GH-273.
- Remove the test suite's optional dependency on the non-core modules
Test::Exception, Test::NoWarnings and Test::Warn. Tests that verify
Net::SSLeay's behaviour when errors occur are now executed regardless of the
availability of these modules.
- Fully automate the process of changing the list of constants exported by
Net::SSLeay. Fixes GH-313.
- Perform function autoloading tests in the test suite. Fixes GH-311.
- In 36_verify.t, account for the fact that the X509_V_FLAG_LEGACY_VERIFY flag
(signalling the use of the legacy X.509 verifier) is no longer exposed as of
LibreSSL 3.4.1. Fixes GH-324.
==== pipewire ====
Subpackages: gstreamer-plugin-pipewire libpipewire-0_3-0 pipewire-modules-0_3 pipewire-pulseaudio pipewire-spa-plugins-0_2 pipewire-spa-tools pipewire-tools
- Add several more patches from upstream
- BlueZ may be missing adapter information for devices in some cases.
Ignore devices without specified adapter:
* 0001-bluez5-dont-create-device-if-adapter-is-missing.patch
- Fix a case when pipewwire could never call callbacks or even
block forever when loop is not running:
* 0001-loop-invoke-immediately-when-loop-is-not-running.patch
- Reconfigure when monitor changes
* 0001-merger-also-reconfigure-when-monitor-changes.patch
- Handle NULL props from metadata object
* 0001-pw-metadata-handle-NULL-props-from-metadata-object.patch
- Improve rate selection so we don't select an invalid rate when
the default is set or the card is already opened in an
unsupported rate:
* 0001-alsa-improve-rate-selection.patch
- Add several patches from upstream
- Avoid an infinite loop when enumerating params of the converter:
* 0001-audioconvert-avoid-infinite-loop.patch
- When the device or adapter is NULL, skip the quirk checks instead
of crashing:
* 0001-bluez5-handle-missing-device-and-adapter-in-quirks.patch
- Remember the last returned value from jack_get_buffer_size and
only emit a buffersize change event when something new is
configured. This fixes startup of jconvolver.
* 0001-jack-remember-last-return-from-jack_get_buffer_size.patch
- Better emulation of pulseaudio which shows monitor sources with
device.class=monitor so now pipewire does that too:
* 0001-pulse-server-show-monitor-sources-with-device_class_monitor.patch
- Fix an errno check:
* 0001-raop-fix-errno-check.patch
- Added more baselibs packages and their dependencies
==== psmisc ====
Version update (23.3 -> 23.4)
- Update to 23.4:
* killall: Dynamically link to selinux and use security attributes
* pstree: Do not crash on missing processes !21
* pstree: fix layout when using -C !24
* pstree: add time namespace !25
* pstree: Dynamically link to selinux and use attr
* fuser: Get less confused about duplicate dev_id !10
* fuser: Only check pathname on non-block devices !31
- Rebase 0001-Use-mountinfo-to-be-able-to-use-the-mount-identity.patch
- Rebase 0002-Use-new-statx-2-system-call-to-avoid-hangs-on-NFS.patch
- Port psmisc-22.21-pstree.patch
- Delete psmisc-v23.3-selinux.patch as not needed anymore
- Rename psmisc-v23.3.dif which is now psmisc-v23.4.dif with correct offsets
==== python-async_timeout ====
Version update (4.0.1 -> 4.0.2)
- update to 4.0.2:
* Fix annotations on __exit__ and __aexit__
* Use stdlib typing.final in Python 3.8+
==== python-google-resumable-media ====
Version update (2.0.0 -> 2.1.0)
- update to 2.1.0:
* add support for Python 3.10
* Include ConnectionError and urllib3 exception as retriable
==== python-ipython ====
Version update (7.30.1 -> 8.0.1)
- Update to 8.0.1
* Security fix CVE-2022-21699: change some default values in
order to prevent potential Execution with Unnecessary
Privileges.
* Almost all version of IPython looks for configuration and
profiles in current working directory. Since IPython was
developed before pip and environments existed it was used a
convenient way to load code/packages in a project dependant
way.
* In 2022, it is not necessary anymore, and can lead to confusing
behavior where for example cloning a repository and starting
IPython or loading a notebook from any Jupyter-Compatible
interface that has ipython set as a kernel can lead to code
execution.
* The current working directory is not searched anymore for
profiles or configurations files.
* Added a __patched_cves__ attribute (set of strings) to IPython
module that contain the list of fixed CVE. This is
informational only.
- Fixes boo#1194936, CVE-2022-21699
- Update requirements.
- Requires the full stdlib including sqlite3
- Revert some spec-cleaner edits
- Update to 8.0.0:
- Minimum supported traitlets version if now 5+
- we now require stack_data
- Minimal Python is now 3.8
- pytest replaces nose.
- iptest/iptest3 cli entrypoints do not exists anymore.
- minimum officially support numpy version has been bumped, but
this should not have much effect on packaging.
- Backport some fixes for Python 3.10 (PR #13412)
- use full-alpha transparency on dvipng rendered LaTeX (PR #13372)
- Traceback improvements
- Autosuggestons
- Show pinfo information in ipdb using ??? and ????
- Autoreload 3 feature
- Auto formatting with black in the CLI
- History Range Glob feature
- Don?t start a multi line cell with sunken parenthesis
- IPython shell for ipdb interact
- Automatic Vi prompt stripping
- Empty History Ranges
- Windows time-implementation: Switch to process_time
- Re-added support for XDG config directories
- Add skip-network-test.patch to skip (gh#ipython/ipython#13468).
==== python-libvirt-python ====
Version update (7.10.0 -> 8.0.0)
- Update to 8.0.0
- Add all new APIs and constants in libvirt 8.0.0
- jsc#SLE-11435, jsc#SLE-18354
==== python-pyftpdlib ====
- Switch off the test suite, it just doesn't work reliably
(gh#giampaolo/pyftpdlib#540).
==== python-pyudev ====
Version update (0.22.0 -> 0.22.0+git.1642212208.d5630bf)
- Update to version 0.22.0+git.1642212208.d5630bf (bsc#1194613):
* Remove another flakey test
* Remove all traces of tox
* Update next Fedora to 35
* Delete a test which is probably flakey for real
* Bump recommended development environment to fedora 34
* Use yamllint on all the configuration files
* Add annotations to GitHub workflows
* No longer use --recursive for isort
* Update formatting for new black
* Establish a weekly task for future fedora
- Remove upstreamed patches:
- remove_mock.patch
==== python-s3fs ====
Version update (2021.7.0 -> 2021.11.1)
- Update to 2021.11.1
* deal with missing ETag (#557)
* ClientPayloadError to retryable (#556)
* pin aiobotocore (#555)
- Release 2021.11.0
* move to fsspec org
* doc tweaks (#546, 540)
* redondant argument in _rm_versioned_bucket_contents (#439)
* allow client_method in url/sign (POST, etc) (#536)
* revert list_v2->head for info (#545)
- Release 2021.10.1
* allow other methods than GET to url/sign (#536)
- Release 2021.10.0
* No changes (just released to keep pin with fsspec)
- Release 2021.09.0
* check for bucket also with get_bucket_location (#533)
* update versioneer (#531)
- Release 2021.08.1
* retry on IncompleteRead (#525)
* fix isdir for missing bucket (#522)
* raise for glob("*") (#5167)
- Release 2021.08.0
* fix for aiobotocore update (#510)
==== python-tqdm ====
Subpackages: python-tqdm-bash-completion python38-tqdm
- Ignore deprecation warnings from pytest-asycio for compatibility
with 0.17
==== ristretto ====
Version update (0.12.1 -> 0.12.2)
Subpackages: ristretto-lang
- Update to version 0.12.2
* Add support for shared thumbnail repositories
(gxo#apps/ristretto#82)
* Add thumbnail flavor support (gxo#apps/ristretto#81)
* Use TreeModel IFace to walk the image list
* Add index and list link to RsttoImageListIter
* Switch to GQueue in RsttoImageList
* Cleanup and simplifications around thumbnail size
* Redistribute thumbnail sizes uniformly
* Disable debug checks in release mode
* Remove unused APIs in RsttoImageList
* Fix and complete file change monitoring
* Thumbnailer: Rework queue management
* Thumbnailer: Properly set the number of visible items
* Take the device scale into account to limit rendering quality
* Avoid multi-threading issue with X11 (gxo#apps/ristretto#76)
* Translation Updates
==== rpm-config-SUSE ====
Version update (0.g89 -> 0.g93)
- Update to version 0.g93:
* locale.attr: Match all files inside LC_MESSAGES (boo#1194865)
* remove leap_version as it's obsolete
==== samba ====
Version update (4.15.2+git.193.a4d6307f1fd -> 4.15.3+git.219.40cc1cd8591)
Subpackages: libsamba-policy0-python3 samba-client samba-doc samba-gpupdate samba-ldb-ldap samba-libs samba-libs-python3 samba-python3 samba-winbind
- Use pkgconfig(krb5) as dependency for the -devel package: allow
OBS to pick the right flavor of krb5-devel (full vs mini).
- Do not require the 'krb5' symbol by samba-client-libs: this
package has an automatic dependency due to linkage on
libgssapi_krb5.so.2. Automatic deps are always better.
- Do not require the 'krb5' symbol from samba-libs: samba-libs
requires samba-client-libs, which in turn requires krb5
libraries. Samba-libs itself has no need for krb5 (but get it
indirectly anyway).
- Reorganize libs packages. Split samba-libs into samba-client-libs,
samba-libs, samba-winbind-libs and samba-ad-dc-libs, merging samba
public libraries depending on internal samba libraries into these
packages as there were dependency problems everytime one of these
public libraries changed its version (bsc#1192684). The devel
packages are merged into samba-devel.
- Rename package samba-core-devel to samba-devel
- Add python-rpm-macros to build requirements
- Update the symlink create by samba-dsdb-modules to private samba
ldb modules following libldb2 changes from /usr/lib64/ldb/samba to
/usr/lib64/ldb2/modules/ldb/samba
- Update to 4.15.3
* Recursive directory delete with veto files is broken in 4.15.0;
(bso#14878);
* A directory containing dangling symlinks cannot be deleted by
SMB2 alone when they are the only entry in the directory;
(bso#14879);
* SIGSEGV in rmdir_internals/synthetic_pathref - dirfsp is used
uninitialized in rmdir_internals(); (bso#14892);
* MaxQueryDuration not honoured in Samba AD DC LDAP; (bso#14694);
* The CVE-2020-25717 username map [script] advice has undesired
side effects for the local nt token; (bso#14901); (bsc#1192849);
* User with multiple spaces (eg Fred<space><space>Nurk) become
un-deletable; (bso#14902);
* Avoid storing NTTIME_THAW (-2) as value on disk; (bso#14127);
* smbXsrv_client_global record validation leads to crash if existing
record points at non-existing process; (bso#14882);
* Crash in vfs_fruit asking for fsp_get_io_fd() for an XATTR call;
(bso#14890);
* Samba process doesn't log to logfile; (bso#14897);
* set_ea_dos_attribute() fallback calling get_file_handle_for_metadata()
triggers locking.tdb assert; (bso#14907);
* Kerberos authentication on standalone server in MIT realm broken;
(bso#14922);
* Segmentation fault when joining the domain; (bso#14923);
* Support for ROLE_IPA_DC is incomplete; (bso#14903);
* rpcclient cannot connect to ncacn_ip_tcp services anymore;
(bso#14767);
* winexe crashes since 4.15.0 after popt parsing; (bso#14893);
* net ads status -P broken in a clustered environment; (bso#14908);
* Memory leak if ioctl(FSCTL_VALIDATE_NEGOTIATE_INFO) fails before
smbd_smb2_ioctl_send; (bso#14788);
* winbindd doesn't start when "allow trusted domains" is off;
(bso#14899);
* smbclient login without password using '-N' fails with
NT_STATUS_INVALID_PARAMETER on Samba AD DC; (bso#14883);
* A schannel client incorrectly detects a downgrade connecting to
an AES only server; (bso#14912);
* Possible null pointer dereference in winbind; (bso#14921);
* Fix -k legacy option for client tools like smbclient, rpcclient,
net, etc.; (bso#14846);
* Add Debian 11 CI bootstrap support; (bso#14872);
* Crash in recycle_unlink_internal(); (bso#14888);
- Fix dependency problem upgrading from libndr0 to libndr2 and
from libsamba-credentials0 to libsamba-credentials1;
(bsc#1192684);
==== selinux-policy ====
Subpackages: selinux-policy-targeted
- Allow colord to use systemd hardenings (bsc#1194631)
==== simple-scan ====
- Add 200.patch: Fix accessibility conflict of constant and its
value. Fixes build with vala 0.55.x.
==== spamassassin ====
Subpackages: perl-Mail-SpamAssassin spamassassin-spamc
- Drop ProtectHome from spamd.service and spampd.service. Unfortunately
spamassing writes there, so ProtectHome=read-only doesn't work.
Whitelisting a specific part has a too high chance of breaking for
this package (bsc#1193248)
==== sqlite3 ====
Version update (3.37.1 -> 3.37.2)
- update to 3.37.2:
* Fix a bug introduced in version 3.35.0 (2021-03-12) that can
cause database corruption if a SAVEPOINT is rolled back while
in PRAGMA temp_store=MEMORY mode, and other changes are made,
and then the outer transaction commits
* Fix a long-standing problem with ON DELETE CASCADE and ON
UPDATE CASCADE in which a cache of the bytecode used to
implement the cascading change was not being reset following a
local DDL change
==== sssd ====
Subpackages: libsss_certmap0 libsss_idmap0 libsss_nss_idmap0 sssd-krb5-common sssd-ldap
- Upgrade LDB_DIR shell variable to %ldbdir macro.
==== systemd ====
Version update (249.7 -> 249.9)
Subpackages: libsystemd0 libudev-devel libudev1 systemd-container systemd-sysvinit udev
- Move the systemd-network-generator stuff in udev package
This generator can generate .link files and is mainly used in initrd where
udev is mandatory.
- Restore /sbin/udevadm and /bin/systemctl (obsolete) paths when split_usr is
true (bsc#1194519)
- Import commit 3743acbce3bd44208af453fc6dc384a1236dc83c (merge of v249.9)
For a complete list of changes, visit:
https://github.com/openSUSE/systemd/compare/e2ca79dd775d1f7d39861d57f23c43f6cd85a872...3743acbce3bd44208af453fc6dc384a1236dc83c
- Extract bits from 0008-sysv-generator-translate-Required-Start-into-a-Wants.patch
which are not specific to the handling of 'Required-Start:' and move them into a
new patch 0009-sysv-add-back-support-for-all-virtual-facility-and-f.patch
- Import commit e2ca79dd775d1f7d39861d57f23c43f6cd85a872 (merge of v249.8)
For a complete list of changes, visit:
https://github.com/openSUSE/systemd/compare/458220239c69b8e5fe7be480929348daeccb70d1...e2ca79dd775d1f7d39861d57f23c43f6cd85a872
- Import commit 458220239c69b8e5fe7be480929348daeccb70d1
e95df40b09 shared/rm-rf: loop over nested directories instead of instead of recursing (CVE-2021-3997 bsc#1194178)
078e04305d shared/rm_rf: refactor rm_rf() to shorten code a bit
6d560d0aca shared/rm_rf: refactor rm_rf_children_inner() to shorten code a bit
6666ff056c localectl: don't omit keymaps files that are symlinks (bsc#1191826)
- Drop the following patches as they have been merged into SUSE/v249 branch:
5000-shared-rm_rf-refactor-rm_rf_children_inner-to-shorte.patch
5001-shared-rm_rf-refactor-rm_rf-to-shorten-code-a-bit.patch
5002-shared-rm-rf-loop-over-nested-directories-instead-of.patch
==== systemd-rpm-macros ====
Version update (14 -> 15)
- Bump to version 15
- %sysusers_create_inline was wrongly marked as deprecated
- %sysusers_create can be useful in certain cases and won't go away until we'll
move to file triggers. So don't mark it as deprecated too
==== u-boot-rpiarm64 ====
Version update (2021.10 -> 2022.01)
Subpackages: u-boot-rpiarm64-doc
- Update to 2022.01
- Update to 2022.01-rc4
- Patch queue updated from https://github.com/openSUSE/u-boot.git tumbleweed-2022.01
* Patches dropped (upstreamed):
0016-Revert-video-backlight-fix-pwm-s-du.patch
0017-rpi-Add-identifier-for-the-new-RPi-.patch
==== virglrenderer ====
- Pick up the full upstream patch for bsc#1194601, so we know from where it comes
* No functional change intended
- security update
- added patches
fix CVE-2022-0175 [bsc#1194601], VUL-0: CVE-2022-0175: virglrenderer: Missing initialization of res->ptr
+ virglrenderer-CVE-2022-0175.patch
==== virt-manager ====
Subpackages: virt-install virt-manager-common
- bsc#1194323 - [jsc#SLE-19237][virt-manager] Detected the wrong
win2k22 guest system version from the local install media
virtinst-windows-server-detection.patch
- Upstream bug fixes (bsc#1027942)
8bb64ad5-console-Dont-block-console-reconnect-for-non-error.patch
Drop virtman-init-viewer-on-reboot.patch
==== webkit2gtk3 ====
Version update (2.34.3 -> 2.34.4)
Subpackages: libjavascriptcoregtk-4_1-0 libwebkit2gtk-4_1-0 typelib-1_0-JavaScriptCore-4_1 typelib-1_0-WebKit2-4_1 webkit2gtk-4_1-injected-bundles
- Update to version 2.34.4:
+ Fix several crashes and rendering issues.
+ This release fixes numerous security issues, including an
especially severe issue that allowed websites to read the names
of IndexedDB databases created by other websites.
- Update _constraints, needs more disk space to build.
==== webkit2gtk3-soup2 ====
Version update (2.34.3 -> 2.34.4)
Subpackages: libjavascriptcoregtk-4_0-18 libwebkit2gtk-4_0-37 typelib-1_0-JavaScriptCore-4_0 typelib-1_0-WebKit2-4_0 webkit2gtk-4_0-injected-bundles
- Update to version 2.34.4:
+ Fix several crashes and rendering issues.
+ This release fixes numerous security issues, including an
especially severe issue that allowed websites to read the names
of IndexedDB databases created by other websites.
- Update _constraints, needs more disk space to build.
==== wicked ====
Subpackages: wicked-service
- fsm: fix device rename via yast (bsc#1194392)
Reset worker config instead to reject a NULL/empty config
xml node -- introduced in wicked 0.6.67 by commit c2a0385.
[+ 0001-fsm-fix-device-rename-via-yast-bsc-1194392.patch]
==== xdg-desktop-portal ====
Version update (1.10.1 -> 1.12.1)
- update to version 1.12.1:
+ Fix a crash in the device portal
- includes changes from 1.12.0:
+ Place portals in the systemd session.slice
+ settings: Add color-scheme key
+ open-uri: Avoid a sync call to org.freedesktop.FileManager
+ screncast: Allow restoring previous sessions
+ Add a portal for requesting realtime permissions
+ ci: Many improvements
+ Publish the docs from a ci job
+ Translation updates
==== xdg-desktop-portal-gtk ====
Version update (1.10.0 -> 1.12.0)
- update to 1.12.0:
+ settings: Provide org.freedesktop.appearance.color-scheme key
+ settings: Handle org.gnome.desktop.a11y.interface schema
+ notification: Handle actions with targets properly
+ Enable settings and appchooser portals by default
+ Translation updates
==== yast2-bootloader ====
Version update (4.4.11 -> 4.4.13)
- Autoyast: add support for password protection (jsc#SLE-20928)
- 4.4.13
- Add support for powerpc secure boot (bsc#1192764 jsc#SLE-18271).
- 4.4.12
==== yast2-firstboot ====
Version update (4.4.6 -> 4.4.7)
- Add client to configure settings for WSL images (jsc#SLE-20413).
- Provide a yast2-firstboot-wsl subpackage to deploy specific
firstboot config for WSL.
- 4.4.7
==== yast2-packager ====
Version update (4.4.19 -> 4.4.20)
- Enabled RSpec verifying doubles (bsc#1194784)
- 4.4.20
==== yast2-ruby-bindings ====
Version update (4.4.6 -> 4.4.7)
- Added yast/rspec/helpers.rb (related to bsc#1194784)
- 4.4.7
==== yast2-trans ====
Version update (84.87.20220109.a8187edd75 -> 84.87.20220116.6b981cb0d7)
Subpackages: yast2-trans-af yast2-trans-ar yast2-trans-bg yast2-trans-bn yast2-trans-bs yast2-trans-ca yast2-trans-cs yast2-trans-cy yast2-trans-da yast2-trans-de yast2-trans-el yast2-trans-en_GB yast2-trans-es yast2-trans-et yast2-trans-fa yast2-trans-fi yast2-trans-fr yast2-trans-gl yast2-trans-gu yast2-trans-hi yast2-trans-hr yast2-trans-hu yast2-trans-id yast2-trans-it yast2-trans-ja yast2-trans-jv yast2-trans-ka yast2-trans-km yast2-trans-ko yast2-trans-lo yast2-trans-lt yast2-trans-mk yast2-trans-mr yast2-trans-nb yast2-trans-nl yast2-trans-pa yast2-trans-pl yast2-trans-pt yast2-trans-pt_BR yast2-trans-ro yast2-trans-ru yast2-trans-si yast2-trans-sk yast2-trans-sl yast2-trans-sr yast2-trans-sv yast2-trans-ta yast2-trans-th yast2-trans-tr yast2-trans-uk yast2-trans-vi yast2-trans-wa yast2-trans-xh yast2-trans-zh_CN yast2-trans-zh_TW yast2-trans-zu
- Update to version 84.87.20220116.6b981cb0d7:
* Translated using Weblate (Ukrainian)
* Translated using Weblate (Russian)
* Translated using Weblate (Italian)
* Translated using Weblate (Italian)
* Translated using Weblate (Italian)
* New POT for text domain 'autoinst'.
* Translated using Weblate (Italian)
* Translated using Weblate (Italian)
* New POT for text domain 'packager'.
* New POT for text domain 'dhcp-server'.
* Translated using Weblate (Slovak)
* Translated using Weblate (Dutch)
* Translated using Weblate (Japanese)
* Translated using Weblate (Catalan)
* New POT for text domain 'storage'.
* New POT for text domain 'packager'.
* New POT for text domain 'installation'.
* New POT for text domain 'bootloader'.
* New POT for text domain 'base'.
* Translated using Weblate (Indonesian)
* Translated using Weblate (Indonesian)
* Translated using Weblate (Slovak)
* Translated using Weblate (Catalan)
* Translated using Weblate (Catalan)
* Translated using Weblate (Catalan)