<?xml version="1.0" encoding="UTF-8"?>
<otherdata xmlns="http://linux.duke.edu/metadata/other" packages="16">
<package pkgid="f7f420e9fec5647764fabff99773a7e5f8541a1a07c5aae2c7e3013d38d77f64" name="SuSEfirewall2-snat" arch="noarch">
  <version epoch="0" ver="1.5" rel="6.20"/>
  <changelog author="kurt@garloff.de" date="1486036800">- Initial creation of package SuSEfirewall2-snat
- Add post, preun, postun
- Mark script as %config file (it is adapted by setup_snat.sh)</changelog>
  <changelog author="kurt@garloff.de" date="1486036801">- Fix typo in repl_custom()
- enable on install</changelog>
  <changelog author="kurt@garloff.de" date="1486036802">- Create int and dmz zones if needed (by assigning fake ifaces).</changelog>
  <changelog author="kurt@garloff.de" date="1486123200">- Custom inclass routing rule when using internal/dmznet.</changelog>
  <changelog author="kurt@garloff.de" date="1486123201">- Avoid spurious inclass routing if not needed.
- Optional verbose output.
- Avoid error when no userdata is available.</changelog>
  <changelog author="kurt@garloff.de" date="1486209600">- Support addip:</changelog>
  <changelog author="kurt@garloff.de" date="1486728000">- Update to 1.0:
  Move all custom settings one level down under the otc: struct.</changelog>
  <changelog author="kurt@garloff.de" date="1487937600">- Add snat_addip.sh, a simple failover daemon for the virtual IP.
- Not yet used.</changelog>
  <changelog author="kurt@garloff.de" date="1487937601">- Version 1.1:
  * Using simple failover daemon to avoid double VIP binding.
  * Rename setup_snat to snat_setup.</changelog>
  <changelog author="kurt@garloff.de" date="1489752000">- Version 1.2:
  * Add support for PRIVATENET.</changelog>
  <changelog author="kurt@garloff.de" date="1489838400">- Version 1.3:
  * Support PROVIDERNET.
  * Support otc.addroute.</changelog>
  <changelog author="kurt@garloff.de" date="1511956800">- Version 1.4:
  * Fix PRIVATENET (172.16 missed the /12).
  * Speedup by reading userdata from file if present.
  * Check for SFW2 changes before restarting (speedup).</changelog>
  <changelog author="kurt@garloff.de" date="1518696000">- Be more verbose, allowing to debug occasionally slow startup.</changelog>
  <changelog author="kurt@garloff.de" date="1528891200">- Version 1.5:
  * We need to insert more custom forwarding rules to allow return
    packets to be forwarded to the internal net on the same iface.
  * Move scripts to /opt/otc/snat/</changelog>
  <changelog author="kurt@garloff.de" date="1538481600">- Increase timeout -- the SFW2 restart can be slow at times.
- Avoid depending on otc-tools.</changelog>
</package>
<package pkgid="24d40789ee00781b16781e56f64bc38561e39fcd8fa4d05194027ebdd3c7f344" name="SuSEfirewall2-snat" arch="src">
  <version epoch="0" ver="1.5" rel="6.20"/>
  <changelog author="kurt@garloff.de" date="1486036800">- Initial creation of package SuSEfirewall2-snat
- Add post, preun, postun
- Mark script as %config file (it is adapted by setup_snat.sh)</changelog>
  <changelog author="kurt@garloff.de" date="1486036801">- Fix typo in repl_custom()
- enable on install</changelog>
  <changelog author="kurt@garloff.de" date="1486036802">- Create int and dmz zones if needed (by assigning fake ifaces).</changelog>
  <changelog author="kurt@garloff.de" date="1486123200">- Custom inclass routing rule when using internal/dmznet.</changelog>
  <changelog author="kurt@garloff.de" date="1486123201">- Avoid spurious inclass routing if not needed.
- Optional verbose output.
- Avoid error when no userdata is available.</changelog>
  <changelog author="kurt@garloff.de" date="1486209600">- Support addip:</changelog>
  <changelog author="kurt@garloff.de" date="1486728000">- Update to 1.0:
  Move all custom settings one level down under the otc: struct.</changelog>
  <changelog author="kurt@garloff.de" date="1487937600">- Add snat_addip.sh, a simple failover daemon for the virtual IP.
- Not yet used.</changelog>
  <changelog author="kurt@garloff.de" date="1487937601">- Version 1.1:
  * Using simple failover daemon to avoid double VIP binding.
  * Rename setup_snat to snat_setup.</changelog>
  <changelog author="kurt@garloff.de" date="1489752000">- Version 1.2:
  * Add support for PRIVATENET.</changelog>
  <changelog author="kurt@garloff.de" date="1489838400">- Version 1.3:
  * Support PROVIDERNET.
  * Support otc.addroute.</changelog>
  <changelog author="kurt@garloff.de" date="1511956800">- Version 1.4:
  * Fix PRIVATENET (172.16 missed the /12).
  * Speedup by reading userdata from file if present.
  * Check for SFW2 changes before restarting (speedup).</changelog>
  <changelog author="kurt@garloff.de" date="1518696000">- Be more verbose, allowing to debug occasionally slow startup.</changelog>
  <changelog author="kurt@garloff.de" date="1528891200">- Version 1.5:
  * We need to insert more custom forwarding rules to allow return
    packets to be forwarded to the internal net on the same iface.
  * Move scripts to /opt/otc/snat/</changelog>
  <changelog author="kurt@garloff.de" date="1538481600">- Increase timeout -- the SFW2 restart can be slow at times.
- Avoid depending on otc-tools.</changelog>
</package>
<package pkgid="fbaab74b06c2591292292b8684745b44d791d624db9e9b59b010969d6813da08" name="bms-network-setup" arch="noarch">
  <version epoch="0" ver="1.11" rel="27.20"/>
  <changelog author="sabrina-mueller@t-systems.com" date="1642593600">- Add BMS support for OTC Debian 11.
  * only allow dataSource openTelekomCloud or openStack</changelog>
  <changelog author="robert.borso@t-systems.com" date="1673352000">- Add BMS support for OTC Alma and Rocky linux 8, 9.</changelog>
  <changelog author="sabrina-mueller@t-systems.com" date="1697457600">- Fix network configuration for additional VLAN interfaces,
  as some distributions leave interfaces down if unknown interface
  options are configured.</changelog>
</package>
<package pkgid="05ef2a0c446d18b8439f767548851533bff9bab666fe8ef32d6d7830522a6a03" name="bms-network-setup" arch="src">
  <version epoch="0" ver="1.11" rel="27.20"/>
  <changelog author="sabrina-mueller@t-systems.com" date="1642593600">- Add BMS support for OTC Debian 11.
  * only allow dataSource openTelekomCloud or openStack</changelog>
  <changelog author="robert.borso@t-systems.com" date="1673352000">- Add BMS support for OTC Alma and Rocky linux 8, 9.</changelog>
  <changelog author="sabrina-mueller@t-systems.com" date="1697457600">- Fix network configuration for additional VLAN interfaces,
  as some distributions leave interfaces down if unknown interface
  options are configured.</changelog>
</package>
<package pkgid="c4041f88403f73ebd4276edfadcb5970297ec135af188894b843e52798a25b39" name="cloud-multiroute" arch="noarch">
  <version epoch="0" ver="0.8" rel="11.162"/>
  <changelog author="kurt@garloff.de" date="1489320000">- Create cloud-multiroute package to set up multiple routing tables.</changelog>
  <changelog author="kurt@garloff.de" date="1489320001">- Add debugging options.</changelog>
  <changelog author="kurt@garloff.de" date="1489320002">- Bugfixes:
  * shyaml returns "True", not "true".
  * Use own gateway in guessgw mode.</changelog>
  <changelog author="kurt@garloff.de" date="1528459200">- Add rtdefl.sh helper.
- Move scripts to sbindir.</changelog>
</package>
<package pkgid="bf47df3cbeaea8b6e1cbfef72500dcf2611930416f2e91bcdf9b7933f81e7f39" name="cloud-multiroute" arch="src">
  <version epoch="0" ver="0.8" rel="11.162"/>
  <changelog author="kurt@garloff.de" date="1489320000">- Create cloud-multiroute package to set up multiple routing tables.</changelog>
  <changelog author="kurt@garloff.de" date="1489320001">- Add debugging options.</changelog>
  <changelog author="kurt@garloff.de" date="1489320002">- Bugfixes:
  * shyaml returns "True", not "true".
  * Use own gateway in guessgw mode.</changelog>
  <changelog author="kurt@garloff.de" date="1528459200">- Add rtdefl.sh helper.
- Move scripts to sbindir.</changelog>
</package>
<package pkgid="183d2d266ff0381fe6fc949bbb27296d7eee407e5d34fa892a4ac0994a2d08a8" name="cloud-otc-keyring" arch="noarch">
  <version epoch="0" ver="2025.1.0" rel="1.86"/>
  <changelog author="Sabrina Mueller &lt;sabrina-mueller@t-systems.com&gt;" date="1730203200">- extension of GPG key</changelog>
</package>
<package pkgid="396c926eda625385d7aa38fc8be3326583e79a9bcd8c5b8ccb8e81a5c4740da0" name="cloud-otc-keyring" arch="src">
  <version epoch="0" ver="2025.1.0" rel="1.86"/>
  <changelog author="Sabrina Mueller &lt;sabrina-mueller@t-systems.com&gt;" date="1730203200">- extension of GPG key</changelog>
</package>
<package pkgid="2bdf843454b429ee218774360dc72f4edccd91ef421d2506e990d74bd06fe80d" name="libxenstore_uvp3_0" arch="x86_64">
  <version epoch="0" ver="3.0.0" rel="39.152"/>
  <changelog author="kurt@garloff.de" date="1467374400">- Fix build on arm32/64.</changelog>
  <changelog author="kurt@garloff.de" date="1528804800">- Rename binaries to xenstore_uvp and xenstore-control_uvp to
  avoid conflicts with stock distro package.</changelog>
</package>
<package pkgid="fe71c05f022d53d8177377c37fbf1c90f80dd495931e794499fddb42040b5070" name="network-hotplug" arch="noarch">
  <version epoch="0" ver="0.4" rel="2.20"/>
  <changelog author="kurt@garloff.de" date="1539172800">- Update to network-hotplug-0.3:
  * Enable setup of all interfaces (also if ending with 0); we have
    protection against overwriting preexisting ifcfg files.
  * Only ifup if network config service is already completed.
  * Remove ifcfg- if we generated it upon hotunplug.</changelog>
  <changelog author="Johannes Schischke &lt;johannes.schischke@t-systems.com&gt;" date="1601640000">- only use hotplug mode for eth, ens and enp interfaces
- deactivated removal of docker/kubernetes interfaces</changelog>
</package>
<package pkgid="d400e53de202620c0ae3f780342ae7e4df563d2ad21e7aac6152681d0c55897f" name="network-hotplug" arch="src">
  <version epoch="0" ver="0.4" rel="2.20"/>
  <changelog author="kurt@garloff.de" date="1539172800">- Update to network-hotplug-0.3:
  * Enable setup of all interfaces (also if ending with 0); we have
    protection against overwriting preexisting ifcfg files.
  * Only ifup if network config service is already completed.
  * Remove ifcfg- if we generated it upon hotunplug.</changelog>
  <changelog author="Johannes Schischke &lt;johannes.schischke@t-systems.com&gt;" date="1601640000">- only use hotplug mode for eth, ens and enp interfaces
- deactivated removal of docker/kubernetes interfaces</changelog>
</package>
<package pkgid="72ab2bec0c280cdf4b8d4786e34dd0f369bf5e8372b7b929e1f7f122c5446417" name="otc-tools" arch="noarch">
  <version epoch="0" ver="0.8.34" rel="11.18"/>
  <changelog author="kurt@garloff.de" date="1660564800">- otc-tools-0834-setrecord.diff:
  Add support for otc.sh domain setrecord to update existing recs.
  Also support passing record names instead of of record ids in
  setrecord, showrecord, deleterecord.</changelog>
</package>
<package pkgid="182f6eb88b0ef349e901ef2c19184c23a035d53400480bc056f0f761a5011d06" name="otc-tools" arch="src">
  <version epoch="0" ver="0.8.34" rel="11.18"/>
  <changelog author="kurt@garloff.de" date="1660564800">- otc-tools-0834-setrecord.diff:
  Add support for otc.sh domain setrecord to update existing recs.
  Also support passing record names instead of of record ids in
  setrecord, showrecord, deleterecord.</changelog>
</package>
<package pkgid="e8bd955e29a00ff8c066d05c1e71c656b51b930afe7cadadd6bcf154c92987c1" name="xenstore_uvp" arch="src">
  <version epoch="0" ver="3.0.0" rel="39.152"/>
  <changelog author="kurt@garloff.de" date="1467374400">- Fix build on arm32/64.</changelog>
  <changelog author="kurt@garloff.de" date="1528804800">- Rename binaries to xenstore_uvp and xenstore-control_uvp to
  avoid conflicts with stock distro package.</changelog>
</package>
<package pkgid="b3cd0998d847c7a45d93c5c437d6f7cc8458743c16130cf1b566fadbd46d5b7c" name="xenstore_uvp" arch="x86_64">
  <version epoch="0" ver="3.0.0" rel="39.152"/>
  <changelog author="kurt@garloff.de" date="1467374400">- Fix build on arm32/64.</changelog>
  <changelog author="kurt@garloff.de" date="1528804800">- Rename binaries to xenstore_uvp and xenstore-control_uvp to
  avoid conflicts with stock distro package.</changelog>
</package>
<package pkgid="2b4c279f5d678e5bb2e4e45e032cecc24fa2402aff660b6f8c369546381e4a9a" name="xenstore_uvp-devel" arch="x86_64">
  <version epoch="0" ver="3.0.0" rel="39.152"/>
  <changelog author="kurt@garloff.de" date="1467374400">- Fix build on arm32/64.</changelog>
  <changelog author="kurt@garloff.de" date="1528804800">- Rename binaries to xenstore_uvp and xenstore-control_uvp to
  avoid conflicts with stock distro package.</changelog>
</package>
</otherdata>