Package: fluidsynth
Version: 2.5.4-61.1
Architecture: amd64
Maintainer: Rui Nuno Capela <rncbc@rncbc.org>
Installed-Size: 54
Depends: libfluidsynth3 (>= 2.5.4-61.1), libc6 (>= 2.34), libpipewire-0.3-0t64 (>= 0.3.6), libstdc++6 (>= 9)
Filename: amd64/fluidsynth_2.5.4-61.1_amd64.deb
Size: 16764
MD5sum: 709101924a96255d9c6c66be546a5465
SHA1: 7b9d557e69a164808fb68b9cc7a8627f8f810688
SHA256: a3ad9c3d239a7ee781ab311fb392b84754fbe4af411fa69434da69ec59955aa9
Section: sound
Priority: optional
Description: FluidSynth is a real-time software synthesizer
  FluidSynth is a real-time software synthesizer based on
  the SoundFont 2 specifications.
  .
  This package contains the command-line utilities.

Package: gigtools
Source: libgig
Version: 4.5.2-37.1
Architecture: amd64
Maintainer: Matt Flax <flatmax@pgb.unsw.edu.au>
Installed-Size: 615
Depends: libgig13 (>= 4.5.2-37.1), libc6 (>= 2.38), libgcc-s1 (>= 3.3.1), libsndfile1 (>= 1.0.20), libstdc++6 (>= 13.1)
Filename: amd64/gigtools_4.5.2-37.1_amd64.deb
Size: 170760
MD5sum: 87600cd058a48661d715f41e5954e370
SHA1: 03001e2e1c6c39beed652221d673323773858fa0
SHA256: a1010602151688b86d6f97bd2bc3cadd31ad939c154da2345d5068b6bc56b19d
Section: utils
Priority: optional
Description: C++ Library for accessing Gigasampler, DLS, SF2, KORG, AKAI files - utilities
  Raw file handling for audio sampler files based on either DLS Level 1/2,
  Gigasampler / GigaStudio, SoundFont version 2 and KORG sound format (.KSF and
  .KMP). These files are typically used in modern day audio waveform samplers
  and synthesizer keyboards.
  .
  There are also tools for reading Akai formated medias (CDRoms, HDs, Zip disks).
  Currently Akai S1000, S01, S2000 and S3000 series are supported.
  .
  This package contains the following command line tools:
  .
  gigdump:
    Prints out the content of a .gig file.
  gigextract:
    Extracts audio samples from a .gig file.
  gigmerge:
    Combines multiple .gig files to one .gig file.
  gig2mono:
    Converts .gig files from stereo to mono.
  gig2stereo:
    Converts .gig files to true interleaved stereo sounds.
  dlsdump:
    Prints out the content of a DLS file.
  rifftree:
    Prints out the RIFF tree of an arbitrary RIFF container file.
  sf2dump:
    Prints out the content of a .sf2 file.
  sf2extract:
    Extracts audio samples from a .sf2 file.
  korgdump:
    Prints out the content of KORG sound files (.KSF, .KMP).
  korg2gig:
    Converts KORG (.KSF, .KMP) sound files to GigaStudio (.gig) files.
  akaidump:
    Dump an AKAI media i.e. from a CDROM drive as disk image file to your HD.
  akaiextract:
    Extracts audio samples from an AKAI media or from an AKAI disk image file.

Package: libfluidsynth-dev
Source: fluidsynth
Version: 2.5.4-61.1
Architecture: amd64
Maintainer: Rui Nuno Capela <rncbc@rncbc.org>
Installed-Size: 174
Depends: libfluidsynth3 (>= 2.5.4-61.1)
Filename: amd64/libfluidsynth-dev_2.5.4-61.1_amd64.deb
Size: 44384
MD5sum: ff7b66f4fd247504a798cb879acd40e3
SHA1: 49ba6093aa7c34a4339dcf3ad2a315625402a44b
SHA256: ec438b79e8c1c877559ea164e88106b5dbe4d96bd08219344d84bdc0896e7d54
Section: libdevel
Priority: optional
Description: FluidSynth is a real-time software synthesizer
  FluidSynth is a real-time software synthesizer based on
  the SoundFont 2 specifications.
  .
  This package contains the header file required for compiling
  hosts and plugins.

Package: libfluidsynth3
Source: fluidsynth
Version: 2.5.4-61.1
Architecture: amd64
Maintainer: Rui Nuno Capela <rncbc@rncbc.org>
Installed-Size: 573
Depends: libasound2t64 (>= 1.0.16), libc6 (>= 2.33), libgcc-s1 (>= 3.3.1), libgomp1 (>= 4.9), libjack-jackd2-0 (>= 1.9.10+20150825) | libjack-0.125, libpipewire-0.3-0t64 (>= 0.3.1), libpulse0 (>= 0.99.1), libsndfile1 (>= 1.0.20), libstdc++6 (>= 14)
Replaces: libfluidsynth2 (<= 2.5.4-61.1)
Filename: amd64/libfluidsynth3_2.5.4-61.1_amd64.deb
Size: 250276
MD5sum: 0f599d5f47f0c9f8094016a4b7bb3d9c
SHA1: a05ae4306d3251a863bb7e2c4a8a0331d2417699
SHA256: fd414a1aa36919cbecd668ad30615b525d52691f6853cf0a679078148246c9b6
Section: libs
Priority: optional
Description: FluidSynth is a real-time software synthesizer
  FluidSynth is a real-time software synthesizer based on
  the SoundFont 2 specifications.

Package: libgig-dev
Source: libgig
Version: 4.5.2-37.1
Architecture: amd64
Maintainer: Matt Flax <flatmax@pgb.unsw.edu.au>
Installed-Size: 2118
Depends: libgig13 (>= 4.5.2-37.1)
Filename: amd64/libgig-dev_4.5.2-37.1_amd64.deb
Size: 349500
MD5sum: 758e5e763a589a5d3564625cc7e623b7
SHA1: 2c8dc19acb855fea202605af1d77d3f31a4cfa54
SHA256: 50f94dde30797fc8b948e8ce57fa3ec483eaf863edba8e0774c5158d6e1b206b
Section: libdevel
Priority: optional
Description: C++ Library for accessing Gigasampler, DLS, SF2, KORG, AKAI files - development files
  libgig is a C++ library for reading, modifying and creating Gigasampler /
  GigaStudio (.gig) files, DLS (Downloadable Sounds) Level 1/2 files, SoundFont
  version 2 (.sf2) and KORG sound files (.KMP and .KSF). These files are
  typically used in modern day audio waveform samplers and synthesizer keyboards.
  .
  Since the Gigasampler / GigaStudio and DLS formats are based ontop of the
  binary RIFF container format, this library also provides convenient access to
  RIFF files in general.
  .
  This package also contains a Linux/POSIX ported version of libakai, which
  provides support for reading Akai formated medias (CDRoms, HDs, Zip disks).
  Currently Akai S1000, S01, S2000 and S3000 series are supported.
  .
  For more information visit
  http://www.linuxsampler.org/libgig/
  .
  This package contains the header files needed for development with libgig.
  You will need this only if you intend to compile programs that use this
  library.

Package: libgig13
Source: libgig
Version: 4.5.2-37.1
Architecture: amd64
Maintainer: Matt Flax <flatmax@pgb.unsw.edu.au>
Installed-Size: 905
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 13.1), libuuid1 (>= 2.16)
Conflicts: libgig, libgig10, libgig11, libgig12, libgig3c2, libgig6, libgig7, libgig8, libgig9
Replaces: libgig, libgig10, libgig11, libgig12, libgig3c2, libgig6, libgig7, libgig8, libgig9
Filename: amd64/libgig13_4.5.2-37.1_amd64.deb
Size: 266086
MD5sum: 0dd3ac710b818458c4928514b0800757
SHA1: 2cc1c7e6c852922b00cbd4286364dee11aa7c404
SHA256: f327aff07abf2f4f9c3263040cfb22f417a0acbe96470ca94b0cb0e16071615f
Section: libs
Priority: optional
Description: C++ Library for accessing Gigasampler, DLS, SF2, KORG, AKAI files
  libgig is a C++ library for reading, modifying and creating Gigasampler /
  GigaStudio (.gig) files, DLS (Downloadable Sounds) Level 1/2 files, SoundFont
  version 2 (.sf2) files and KORG sound files (.KMP and .KSF). These files are
  typically used in modern day audio waveform samplers and synthesizer keyboards.
  .
  Since the Gigasampler / GigaStudio and DLS formats are based ontop of the
  binary RIFF container format, this library also provides convenient access to
  RIFF files in general.
  .
  This package also contains a Linux/POSIX ported version of libakai, which
  provides support for reading Akai formated medias (CDRoms, HDs, Zip disks).
  Currently Akai S1000, S01, S2000 and S3000 series are supported.
  .
  For more information visit
  http://www.linuxsampler.org/libgig/

Package: libmad0
Source: libmad
Version: 0.16.4-13.1
Architecture: amd64
Maintainer: Rui Nuno Capela <rncbc@rncbc.org>
Installed-Size: 146
Depends: libc6 (>= 2.14)
Filename: amd64/libmad0_0.16.4-13.1_amd64.deb
Size: 56926
MD5sum: 621ab0894d7fc3fe3415b7dadbaade04
SHA1: 219dce331e2cbf6f3826b603bf860033796bfe40
SHA256: ce8069a165b1c382931b68d51fc2182fefc4abf5f1d9e5a0220d3c220e561cdb
Section: libs
Priority: optional
Description: An MPEG audio decoder library
  MAD is a high-quality MPEG audio decoder. It currently supports MPEG-1
  and the MPEG-2 extension to Lower Sampling Frequencies, as well as the
  so-called MPEG 2.5 format. All three audio layers (Layer I, Layer II,
  and Layer III a.k.a. MP3) are fully implemented. MAD supports high
  quality 24-bit PCM output for modern audio technologies. MAD computes
  using 100% fixed-point (integer) computation, so you can run it without
  a floating point unit.

Package: libmad0-dev
Source: libmad
Version: 0.16.4-13.1
Architecture: amd64
Maintainer: Rui Nuno Capela <rncbc@rncbc.org>
Installed-Size: 52
Depends: libmad0 (>= 0.16.4-13.1)
Filename: amd64/libmad0-dev_0.16.4-13.1_amd64.deb
Size: 11630
MD5sum: e7097e2e4a77e91f444e50efd6a8d7f1
SHA1: 06f3e5e33b6d4a80294c7d2753cdaa00a4f95bc7
SHA256: 4cc006da920a03f2b26b94bd929f2b642763d474ef88761afeff4a8f1d9d6009
Section: libdevel
Priority: optional
Description: An MPEG audio decoder library - development files
  MAD is a high-quality MPEG audio decoder. It currently supports MPEG-1
  and the MPEG-2 extension to Lower Sampling Frequencies, as well as the
  so-called MPEG 2.5 format. All three audio layers (Layer I, Layer II,
  and Layer III a.k.a. MP3) are fully implemented. MAD supports high
  quality 24-bit PCM output for modern audio technologies. MAD computes
  using 100% fixed-point (integer) computation, so you can run it without
  a floating point unit.
  .
  This package contains headers, documentation and static libraries.

Package: librubberband-dev
Source: rubberband
Version: 4.0.0-18.1
Architecture: amd64
Maintainer: Rui Nuno Capela <rncbc@rncbc.org>
Installed-Size: 1057
Depends: librubberband3 (= 4.0.0-18.1)
Filename: amd64/librubberband-dev_4.0.0-18.1_amd64.deb
Size: 196540
MD5sum: fcda7ed0d650eca8dd4166659db5ba7b
SHA1: e27ba1bb3738a41718d2c8b30957101529194fe8
SHA256: ab2d6911657ff1a49c43ff4e75f83b056b13271a043418f81e453fc5ea3e6675
Section: libdevel
Priority: extra
Description: An audio time-stretching and pitch-shifting library (development files)
  Rubber Band is a library and utility program that permits you to
  change the tempo and pitch of an audio recording independently of
  one another.
  This package contains development files for linking against
  librubberband, along with the static version of the library. API
  documentation is available at
  http://www.breakfastquay.com/rubberband/code-doc/ .

Package: librubberband3
Source: rubberband
Version: 4.0.0-18.1
Architecture: amd64
Maintainer: Rui Nuno Capela <rncbc@rncbc.org>
Installed-Size: 415
Depends: libc6 (>= 2.43), libfftw3-double3 (>= 3.3.10), libgcc-s1 (>= 3.3.1), libsamplerate0 (>= 0.1.7), libstdc++6 (>= 13.1)
Replaces: librubberband2 (<= 4.0.0-18.1)
Filename: amd64/librubberband3_4.0.0-18.1_amd64.deb
Size: 148138
MD5sum: 2d70f2ac7ffa52d44927013b0e2e8851
SHA1: 73938b866aa4da0c1f62a54f2a114addc3024285
SHA256: 90d067f7465e1a1137006a8252107d08129239a577d43ee70987cf8ace08238e
Section: libs
Priority: extra
Description: An audio time-stretching and pitch-shifting library
  Rubber Band is a library and utility program that permits you to
  change the tempo and pitch of an audio recording independently of
  one another.

Package: rubberband
Version: 4.0.0-18.1
Architecture: amd64
Maintainer: Rui Nuno Capela <rncbc@rncbc.org>
Installed-Size: 616
Depends: librubberband3 (= 4.0.0-18.1)
Replaces: rubberband-cli (<= 4.0.0-18.1)
Filename: amd64/rubberband_4.0.0-18.1_amd64.deb
Size: 126948
MD5sum: dbadf3b413cc5b4a741361ec35eb1ea0
SHA1: 9285ea31c484e59f6dee7fb885f58e5a2118ccd7
SHA256: c0f177e1c1e0ab6126ea5c29289a4a88e6e3306295502a655f3d9d9a4365576d
Section: sound
Priority: extra
Description: An audio time-stretching and pitch-shifting utility
  Rubber Band is a library and utility program that permits you to
  change the tempo and pitch of an audio recording independently of
  one another.
  This package contains a command-line utility that can be used to
  exploit Rubber Band's capabilities.

Package: rubberband-ladspa
Source: rubberband
Version: 4.0.0-18.1
Architecture: amd64
Maintainer: Rui Nuno Capela <rncbc@rncbc.org>
Installed-Size: 341
Depends: librubberband3 (= 4.0.0-18.1)
Filename: amd64/rubberband-ladspa_4.0.0-18.1_amd64.deb
Size: 131904
MD5sum: 93bbc7b923b82e8cd9798b88e1fb4fd3
SHA1: fb01a178e18755103e7a1f0e706db79ae8987742
SHA256: 828adc663fe448ee4476694a1a057f2a2635da1e362733c78c448bee300fcf2d
Section: sound
Priority: extra
Description: A LADSPA plugin for audio pitch-shifting
  Rubber Band is a library and utility program that permits you to
  change the tempo and pitch of an audio recording independently of
  one another.
  This package contains a LADSPA plugin.

Package: rubberband-lv2
Source: rubberband
Version: 4.0.0-18.1
Architecture: amd64
Maintainer: Rui Nuno Capela <rncbc@rncbc.org>
Installed-Size: 354
Depends: librubberband3 (= 4.0.0-18.1)
Filename: amd64/rubberband-lv2_4.0.0-18.1_amd64.deb
Size: 132836
MD5sum: cbb8c80a4a2f8f35c6276f6138d4943d
SHA1: 026a344250ce127e8e853c5b7a55fc47c72bc375
SHA256: 07b23daec260cf0bd40ff734fdc3d8a4c4a13257d4e00b2484cb280969f23053
Section: sound
Priority: extra
Description: A LV2 plugin for audio pitch-shifting
  Rubber Band is a library and utility program that permits you to
  change the tempo and pitch of an audio recording independently of
  one another.
  This package contains a LV2 plugin.

Package: rubberband-vamp
Source: rubberband
Version: 4.0.0-18.1
Architecture: amd64
Maintainer: Rui Nuno Capela <rncbc@rncbc.org>
Installed-Size: 282
Depends: librubberband3 (= 4.0.0-18.1)
Filename: amd64/rubberband-vamp_4.0.0-18.1_amd64.deb
Size: 112468
MD5sum: 836f7351a3136c19f14303365bb13a11
SHA1: ca3dc03452f0f90051a923dadd8610730c3f0c26
SHA256: 7f58077c9c514f25f301c732dc6e3ae14fc91a836b674ae6fea2650dd518c8bf
Section: sound
Priority: extra
Description: Vamp plugins using Rubber Band
  Rubber Band is a library and utility program that permits you to
  change the tempo and pitch of an audio recording independently of
  one another.
  This package contains VAMP plugins.

